On Fri, Oct 18, 2013 at 01:47:01PM +0000, Monk, Roger wrote: > On Thu, Oct 17, 2013 at 23:32:56, Dmytriyenko, Denys wrote: > > Subject: Re: [meta-arago] [PATCHv2 04/11] > > ti-connectivity/wpa-supplicant- > > wl18xx: Add Wilink8 r8.a7.02 > > > > Ping. > > Thanks. Based on the good feedback from Franklin/Chase, I'll rework the > includes a bit and resubmit.
Roger, Ping on this one. Thanks. > > On Thu, Oct 10, 2013 at 03:10:56PM +0000, Maupin, Chase wrote: > > > > > > > > > >-----Original Message----- > > > >From: [email protected] [mailto:meta-arago- > > > >[email protected]] On Behalf Of Monk, Roger > > > >Sent: Thursday, October 10, 2013 11:02 AM > > > >To: [email protected] > > > >Subject: [meta-arago] [PATCHv2 04/11] ti-connectivity/wpa- > > > >supplicant-wl18xx: Add Wilink8 r8.a7.02 > > > > > > > > * Add v r8.a7.02 engineering release wpa supplicant > > > > * This release supports the omap-a15 devices (omap5-evm/dra7- > > > >evm) with ES 2.1 WL8 > > > > * OMAP5432 UEVMs with the following SKU contain ES2.1 > > > >Wilink8 TDK 18xx module > > > > * OMAP5432x-xx-x1-xx > > > > * Bump PR > > > > * Replace defconfig with original wpa-supplicant defconfig > > > > * Add back SDK specific defconfig changes > > > > * Enable WFD (WiFi Display) > > > > * Revert some android patches which prevent WFD > > > > > > > >Signed-off-by: Roger Monk <[email protected]> > > > >--- > > > > ...0001-revert-android-patches-to-enable-wfd.patch | 44 ++++++ > > > > .../defconfig | 150 > > > >+++++++++++++++----- > > > > ....a6.01.bb => wpa-supplicant-wl18xx_r8.a7.02.bb} | 11 +- > > > > 3 files changed, 166 insertions(+), 39 deletions(-) create mode > > > >100644 meta-arago-extras/recipes-connectivity/wpa- > > > >supplicant/wpa-supplicant-wl18xx-r8.a7.02/0001-revert-android- > > > >patches-to-enable-wfd.patch > > > > copy meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa- > > > >supplicant-r5.sp4.01 => wpa-supplicant-wl18xx-r8.a7.02}/defconfig > > > >(74%) > > > > mode change 100755 => 100644 > > > > copy meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa- > > > >supplicant-wl18xx_r8.a6.01.bb => wpa-supplicant- > > > >wl18xx_r8.a7.02.bb} > > > >(78%) > > > > > > > >diff --git a/meta-arago-extras/recipes-connectivity/wpa- > > > >supplicant/wpa-supplicant-wl18xx-r8.a7.02/0001-revert-android- > > > >patches-to-enable-wfd.patch b/meta-arago-extras/recipes- > > > >connectivity/wpa-supplicant/wpa-supplicant-wl18xx-r8.a7.02/0001- > > > >revert-android-patches-to-enable-wfd.patch > > > >new file mode 100644 > > > >index 0000000..29528b4 > > > >--- /dev/null > > > >+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-wl18xx-r8.a7.02/0001-revert-android-patches-to-enable- > > > >wfd.patch > > > >@@ -0,0 +1,44 @@ > > > >+ > > > >+diff -rupN a/src/common/wpa_ctrl.c b/src/common/wpa_ctrl.c > > > >+--- a/src/common/wpa_ctrl.c 2013-09-02 16:46:22.708023057 +0100 > > > >++++ b/src/common/wpa_ctrl.c 2013-08-30 10:22:19.811255355 +0100 > > > >+@@ -164,6 +164,10 @@ try_again: > > > >+ return NULL; > > > >+ } > > > >+ > > > >++#if 0 > > > >++//IH this code is introduced in recent supplicant that appears > > > >to make RMD app calls to wpa_ctrl_recv() fail and > > > >++// the supplicant fails to write to the same socket!!! > > > >++// Temp fix to remove it, probably solution will be in app set > > > >up/usage?? > > > >+ /* > > > >+ * Make socket non-blocking so that we don't hang forever if > > > >+ * target dies unexpectedly. > > > >+@@ -176,7 +180,7 @@ try_again: > > > >+ /* Not fatal, continue on.*/ > > > >+ } > > > >+ } > > > >+- > > > >++#endif > > > >+ return ctrl; > > > >+ } > > > >+ > > > >+diff -rupN a/wpa_supplicant/wpa_supplicant.c > > > >b/wpa_supplicant/wpa_supplicant.c > > > >+--- a/wpa_supplicant/wpa_supplicant.c 2013-09-04 > > > >16:57:26.000000000 +0100 > > > >++++ b/wpa_supplicant/wpa_supplicant.c 2013-09-04 > > > >17:02:02.256720695 +0100 > > > >+@@ -3025,13 +3025,15 @@ next_driver: > > > >+ } > > > >+ > > > >+ #ifdef CONFIG_P2P > > > >++ #ifdef ANDROID > > > >+ if (os_strncmp(iface->ifname, "wlan0", 4) == 0) { > > > >+ wpa_printf(MSG_DEBUG, "Disable P2P on wlan0"); > > > >+ wpa_s->conf->p2p_disabled = 1; > > > >+ } > > > >+ > > > >+ if (os_strncmp(iface->ifname, "p2p0", 4) == 0) > > > >+- if (wpas_p2p_init(wpa_s->global, wpa_s) < 0) { > > > >++#endif > > > >++ if (wpas_p2p_init(wpa_s->global, wpa_s) < 0) { > > > >+ wpa_msg(wpa_s, MSG_ERROR, "Failed to init P2P"); > > > >+ return -1; > > > >+ } > > > >diff --git a/meta-arago-extras/recipes-connectivity/wpa- > > > >supplicant/wpa-supplicant-r5.sp4.01/defconfig b/meta-arago- > > > >extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx- > > > >r8.a7.02/defconfig > > > >old mode 100755 > > > >new mode 100644 > > > >similarity index 74% > > > >copy from meta-arago-extras/recipes-connectivity/wpa- > > > >supplicant/wpa-supplicant-r5.sp4.01/defconfig > > > >copy to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-wl18xx-r8.a7.02/defconfig > > > >index b982e2a..80d2f63 > > > >--- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-r5.sp4.01/defconfig > > > >+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-wl18xx-r8.a7.02/defconfig > > > >@@ -39,18 +39,6 @@ > > > > #LIBS = -lssl > > > > > > > > > >############################################################### > > ### > > > >############# > > > > > > > >-#CC=$(CROSS_COMPILE)gcc > > > >-#CFLAGS += -DCONFIG_LIBNL20 > > > >-#CPPFLAGS += -DCONFIG_LIBNL20 > > > >-#LIBS += -L$(NFSROOT)/lib -lnl > > > >-#LIBS_p += -L$(NFSROOT)/lib > > > >-#LIBDIR = $(NFSROOT)/lib > > > >-#BINDIR = $(NFSROOT)/usr/sbin > > > >- > > > >-CONFIG_WAPI=y > > > >-CONFIG_LIBNL20=y > > > >-NEED_BGSCAN=y > > > >-CONFIG_BGSCAN_LEARN=y > > > > > > > > # Driver interface for Host AP driver #CONFIG_DRIVER_HOSTAP=y @@ > > > >-75,7 +63,7 @@ CONFIG_BGSCAN_LEARN=y #CONFIG_DRIVER_ATMEL=y > > > > > > > > # Driver interface for old Broadcom driver -# Please note that the > > > >newer Broadcom driver ("hybrid Linux > > > >driver") supportsBG > > > >+# Please note that the newer Broadcom driver ("hybrid Linux > > > >driver") supports > > > > # Linux wireless extensions and does not need (or even work) with > > > >the old # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. > > > > #CONFIG_DRIVER_BROADCOM=y > > > >@@ -90,16 +78,22 @@ CONFIG_BGSCAN_LEARN=y > > #CONFIG_DRIVER_RALINK=y > > > > > > > > # Driver interface for generic Linux wireless extensions > > > >+# Note: WEXT is deprecated in the current Linux kernel version > > > >and no new > > > >+# functionality is added to it. nl80211-based interface is the > > > >new > > > >+# replacement for WEXT and its use allows wpa_supplicant to > > > >properly control > > > >+# the driver to improve existing functionality like roaming and > > > >to support new > > > >+# functionality. > > > > CONFIG_DRIVER_WEXT=y > > > > > > > > # Driver interface for Linux drivers using the nl80211 kernel > > > >interface CONFIG_DRIVER_NL80211=y > > > >+CONFIG_LIBNL20=y > > > > > > > > # Driver interface for FreeBSD net80211 layer (e.g., Atheros > > > >driver) > > > > #CONFIG_DRIVER_BSD=y > > > > #CFLAGS += -I/usr/local/include > > > > #LIBS += -L/usr/local/lib > > > >-#LIBS_p += -L/usr/local/libBG > > > >+#LIBS_p += -L/usr/local/lib > > > > #LIBS_c += -L/usr/local/lib > > > > > > > > # Driver interface for Windows NDIS @@ -121,11 +115,6 @@ > > > >CONFIG_DRIVER_NL80211=y # Driver interface > > for > > > >development testing #CONFIG_DRIVER_TEST=y > > > > > > > >-# Include client MLME (management frame processing) for test > > > >driver -# This can be used to test MLME operations in hostapd with > > > >the test interface. > > > >-# space. > > > >-#CONFIG_CLIENT_MLME=y > > > >- > > > > # Driver interface for wired Ethernet drivers > > > >CONFIG_DRIVER_WIRED=y > > > > > > > >@@ -177,6 +166,9 @@ CONFIG_EAP_OTP=y # EAP-PSK (experimental; this > > > >is _not_ needed for WPA-PSK) #CONFIG_EAP_PSK=y > > > > > > > >+# EAP-pwd (secure authentication using only a password) > > > >+#CONFIG_EAP_PWD=y > > > >+ > > > > # EAP-PAX > > > > #CONFIG_EAP_PAX=y > > > > > > > >@@ -208,6 +200,11 @@ CONFIG_EAP_LEAP=y CONFIG_WPS=y # Enable > > WSC > > > >2.0 support CONFIG_WPS2=y > > > >+# Enable WPS external registrar functionality #CONFIG_WPS_ER=y # > > > >+Disable credentials for an open network by default when acting > > > >as a WPS > > > >+# registrar. > > > >+#CONFIG_WPS_REG_DISABLE_OPEN=y > > > > > > > > # EAP-IKEv2 > > > > #CONFIG_EAP_IKEV2=y > > > >@@ -224,7 +221,10 @@ CONFIG_SMARTCARD=y # Enable this if EAP-SIM > > or > > > >EAP-AKA is included #CONFIG_PCSC=y > > > > > > > >-# Development testingBG > > > >+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) > > > >+#CONFIG_HT_OVERRIDES=y > > > >+ > > > >+# Development testing > > > > #CONFIG_EAPOL_TEST=y > > > > > > > > # Select control interface backend for external programs, e.g, > > > >wpa_cli: > > > >@@ -242,6 +242,10 @@ CONFIG_CTRL_IFACE=y # the resulting binary. > > > > #CONFIG_READLINE=y > > > > > > > >+# Include internal line edit mode in wpa_cli. This can be used as > > > >a replacement > > > >+# for GNU Readline to provide limited command line editing and > > > >history support. > > > >+#CONFIG_WPA_CLI_EDIT=y > > > >+ > > > > # Remove debugging code that is printing out debug message to > > > >stdout. > > > > # This can be used to reduce the size of the wpa_supplicant > > > >considerably # if debugging code is not needed. The size reduction > > > >can be around 35% @@ -295,13 +299,16 @@ CONFIG_BACKEND=file # unix > > = > > > >UNIX/POSIX like systems (default) # win32 = Windows systems # > > > >none = Empty template -#CONFIG_OS=unix > > > >+CONFIG_OS=unix > > > > > > > > # Select event loop implementation # eloop = select() loop > > > >(default) # eloop_win = Windows events and WaitForMultipleObject() > > > >loop # eloop_none = Empty template -#CONFIG_ELOOP=eloop > > > >+CONFIG_ELOOP=eloop > > > >+ > > > >+# Should we use poll instead of select? Select is used by > > > >default. > > > >+#CONFIG_ELOOP_POLL=y > > > > > > > > # Select layer 2 packet implementation # linux = Linux packet > > > >socket (default) @@ -310,7 +317,7 @@ CONFIG_BACKEND=file # winpcap > > > >= WinPcap with receive thread # ndis = Windows NDISUIO (note: > > > >requires > > > >CONFIG_USE_NDISUIO=y) # none = Empty template > > > >-#CONFIG_L2_PACKET=linux > > > >+CONFIG_L2_PACKET=linux > > > > > > > > # PeerKey handshake for Station to Station Link (IEEE 802.11e > > > >DLS) > > > > CONFIG_PEERKEY=y > > > >@@ -323,18 +330,24 @@ CONFIG_PEERKEY=y > > > > > > > > # Select TLS implementation > > > > # openssl = OpenSSL (default) > > > >-# gnutls = GnuTLS (needed for TLS/IA, see also > > > >CONFIG_GNUTLS_EXTRA) > > > >+# gnutls = GnuTLS > > > > # internal = Internal TLSv1 implementation (experimental) # none = > > > > Empty template #CONFIG_TLS=openssl > > > > > > > >-# Whether to enable TLS/IA support, which is required for EAP- > > > >TTLSv1. > > > >-# You need CONFIG_TLS=gnutls for this to have any effect. Please > > > >note that -# even though the core GnuTLS library is released under > > > >LGPL, this extra -# library uses GPL and as such, the terms of GPL > > > >apply to the combination -# of wpa_supplicant and GnuTLS if this > > > >option is enabled. BSD license may not -# apply for distribution of > > > >the resulting binary. > > > >-#CONFIG_GNUTLS_EXTRA=y > > > >+# TLS-based EAP methods require at least TLS v1.0. Newer version > > > >of TLS (v1.1) > > > >+# can be enabled to get a stronger construction of messages when > > > >block ciphers > > > >+# are used. It should be noted that some existing TLS v1.0 -based > > > >+# implementation may not be compatible with TLS v1.1 message > > > >(ClientHello is > > > >+# sent prior to negotiating which version will be used) > > > >+#CONFIG_TLSV11=y > > > >+ > > > >+# TLS-based EAP methods require at least TLS v1.0. Newer version > > > >of TLS (v1.2) > > > >+# can be enabled to enable use of stronger crypto algorithms. It > > > >should be > > > >+# noted that some existing TLS v1.0 -based implementation may not > > > >be compatible > > > >+# with TLS v1.2 message (ClientHello is sent prior to negotiating > > > >which version > > > >+# will be used) > > > >+#CONFIG_TLSV12=y > > > > > > > > # If CONFIG_TLS=internal is used, additional library and include > > > >paths are # needed for LibTomMath. Alternatively, an integrated, > > > >minimal version of @@ -396,6 +409,21 @@ > > > >CONFIG_CTRL_IFACE_DBUS_INTRO=y # Add support for writing debug log > > > >to a file > > > >(/tmp/wpa_supplicant-log-#.txt) > > > > CONFIG_DEBUG_FILE=y > > > > > > > >+# Send debug messages to syslog instead of stdout > > > >+#CONFIG_DEBUG_SYSLOG=y # Set syslog facility for debug messages > > > >+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON > > > >+ > > > >+# Add support for sending all debug messages (regardless of debug > > > >verbosity) > > > >+# to the Linux kernel tracing facility. This helps debug the > > > >entire stack by > > > >+# making it easy to record everything happening from the driver > > > >up into the > > > >+# same file, e.g., using trace-cmd. > > > >+#CONFIG_DEBUG_LINUX_TRACING=y > > > >+ > > > >+# Add support for writing debug log to Android logcat instead of > > > >standard > > > >+# output > > > >+#CONFIG_ANDROID_LOG=y > > > >+ > > > > # Enable privilege separation (see README 'Privilege separation' > > > >for details) > > > > #CONFIG_PRIVSEP=y > > > > > > > >@@ -407,7 +435,7 @@ CONFIG_DEBUG_FILE=y # This tracks use of > > memory > > > >allocations and other registrations and reports # incorrect use > > > >with a backtrace of call (or allocation) location. > > > > #CONFIG_WPA_TRACE=y > > > >-# For BSD, comment out these. > > > >+# For BSD, uncomment these. > > > > #LIBS += -lexecinfo > > > > #LIBS_p += -lexecinfo > > > > #LIBS_c += -lexecinfo > > > >@@ -416,15 +444,65 @@ CONFIG_DEBUG_FILE=y # This enables use of > > > >libbfd to get more detailed symbols for the backtraces # generated > > > >by CONFIG_WPA_TRACE=y. > > > > #CONFIG_WPA_TRACE_BFD=y > > > >-# For BSD, comment out these. > > > >+# For BSD, uncomment these. > > > > #LIBS += -lbfd -liberty -lz > > > > #LIBS_p += -lbfd -liberty -lz > > > > #LIBS_c += -lbfd -liberty -lz > > > > > > > >-# for p2p > > > >+# wpa_supplicant depends on strong random number generation being > > > >available > > > >+# from the operating system. os_get_random() function is used to > > > >fetch random > > > >+# data when needed, e.g., for key generation. On Linux and BSD > > > >systems, this > > > >+# works by reading /dev/urandom. It should be noted that the OS > > > >entropy pool > > > >+# needs to be properly initialized before wpa_supplicant is > > > >started. This is > > > >+# important especially on embedded devices that do not have a > > > >hardware random > > > >+# number generator and may by default start up with minimal > > > >entropy available > > > >+# for random number generation. > > > >+# > > > >+# As a safety net, wpa_supplicant is by default trying to > > > >internally collect > > > >+# additional entropy for generating random data to mix in with > > > >the data fetched > > > >+# from the OS. This by itself is not considered to be very > > > >strong, but it may > > > >+# help in cases where the system pool is not initialized > > > >properly. However, it > > > >+# is very strongly recommended that the system pool is > > > >initialized with enough > > > >+# entropy either by using hardware assisted random number > > > >generator or by > > > >+# storing state over device reboots. > > > >+# > > > >+# wpa_supplicant can be configured to maintain its own entropy > > > >store over > > > >+# restarts to enhance random number generation. This is not > > > >perfect, but it is > > > >+# much more secure than using the same sequence of random numbers > > > >after every > > > >+# reboot. This can be enabled with -e<entropy file> command line > > > >option. The > > > >+# specified file needs to be readable and writable by > > > >wpa_supplicant. > > > >+# > > > >+# If the os_get_random() is known to provide strong random data > > > >(e.g., on > > > >+# Linux/BSD, the board in question is known to have reliable > > > >source of random > > > >+# data from /dev/urandom), the internal wpa_supplicant random > > > >pool can be > > > >+# disabled. This will save some in binary size and CPU use. > > > >However, this > > > >+# should only be considered for builds that are known to be used > > > >on devices > > > >+# that meet the requirements described above. > > > >+#CONFIG_NO_RANDOM_POOL=y > > > >+ > > > >+# IEEE 802.11n (High Throughput) support (mainly for AP mode) > > > >+CONFIG_IEEE80211N=y > > > >+ > > > >+# Interworking (IEEE 802.11u) > > > >+# This can be used to enable functionality to improve > > > >interworking with > > > >+# external networks (GAS/ANQP to learn more about the networks > > > >and network > > > >+# selection based on available credentials). > > > >+#CONFIG_INTERWORKING=y > > > >+ > > > >+# Hotspot 2.0 > > > >+#CONFIG_HS20=y > > > >+ > > > >+# Disable roaming in wpa_supplicant #CONFIG_NO_ROAMING=y > > > >+ > > > >+# Enable P2P > > > > CONFIG_P2P=y > > > > CONFIG_AP=y > > > > > > > >-# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y > > > >+# bgscan > > > >+NEED_BGSCAN=y > > > >+CONFIG_BGSCAN_LEARN=y > > > >+CONFIG_BGSCAN_SIMPLE=y > > > > > > > >+# Enable WIFI Display > > > >+CONFIG_WIFI_DISPLAY=y > > > >\ No newline at end of file > > > >diff --git a/meta-arago-extras/recipes-connectivity/wpa- > > > >supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb b/meta-arago- > > > >extras/recipes-connectivity/wpa-supplicant/wpa-supplicant- > > > >wl18xx_r8.a7.02.bb > > > >similarity index 78% > > > >copy from meta-arago-extras/recipes-connectivity/wpa- > > > >supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb > > > >copy to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-wl18xx_r8.a7.02.bb > > > >index f6c4f70..0ea9ff5 100644 > > > >--- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-wl18xx_r8.a6.01.bb > > > >+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > > > >supplicant-wl18xx_r8.a7.02.bb > > > >@@ -10,9 +10,14 @@ LIC_FILES_CHKSUM = > > > >"file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \ > > > > > > > > FILESEXTRAPATHS_append := "${THISDIR}/wpa-supplicant:" > > > > > > > >-# Tag: ol_r8.a6.01 > > > >-SRCREV = "7190ff7dbd43243290b626068ded0d61c5019050" > > > >-PR = "r2+gitr${SRCPV}" > > > >+COMPATIBLE_MACHINE = "(omap-a15)" > > > >+ > > > >+# Tag: ol_r8.a7.02 > > > >+SRCREV = "4dda294a5186f3efb437ae0898a6df71655843ef" > > > >+PR = "r4+gitr${SRCPV}" > > > > > > Why not reset the PR? Is there no corresponding PV bump for this release? > > > > > > >+ > > > >+SRC_URI += "file://0001-revert-android-patches-to-enable- > > > >wfd.patch;patchdir=.. \ > > > >+" > > > > > > > > # Add ti to the PV to indicate that this is a TI modify version of > > > >wpa-supplicant. > > > > PV = "2.0-devel-ti" > > > >-- > > > >1.7.9.5 > > > > > > > >_______________________________________________ > > > >meta-arago mailing list > > > >[email protected] > > > >http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago > > > _______________________________________________ > > > meta-arago mailing list > > > [email protected] > > > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago > > > _______________________________________________ > meta-arago mailing list > [email protected] > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago > _______________________________________________ meta-arago mailing list [email protected] http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
