> -----Original Message-----
> From: R, Karthik
> Sent: Wednesday, September 03, 2014 7:46 AM
> To: Cooper Jr., Franklin; [email protected]
> Subject: RE: [meta-arago] [PATCH 00/12] Enabling WL8 R8.4 on dora
>
> Hi Franklin,
>
> Thanks for your inputs. I did some reading about these suggestions and I fully
> understand your intent behind it.
> I have regenerated the patches sent out the version 2 of this patch set for
> review. Please review them if you find it in order.
> If you need more details about the patches do let me know.
>
> I read a note in the git help that said that the patches generated by using
> the
> options that make the differences minimal like the -D option will result in
> patches that cannot be applied by git am.
[Franklin] -M not -D correct? Anyway I've never had an issue when I can't apply
patches when people use those options. I never had Denys complained and he even
frequently request that myself and other people use those options I mentioned.
I don't know if he does a bit more work behind the scenes to get those patches
to work but I've never ran into any problems.
> So from a review point its fine, but I don't understand how it will get merged
> into the repo?
> Could you please help me understand the flow of the patches?
>
> Regards
> Karthik
>
> -----Original Message-----
> From: Cooper Jr., Franklin
> Sent: Wednesday, September 03, 2014 3:17 AM
> To: R, Karthik; [email protected]
> Subject: RE: [meta-arago] [PATCH 00/12] Enabling WL8 R8.4 on dora
>
> If you can resend using --find-copies-harder it will make it a lot easier to
> review. You might also need to play with the -M option to make sure your
> only sending as little deltas as possible.
>
> Also it would be nice in each of the patches if you add [for dora] to the
> patch
> subject. I know you indicated that in the cover letter but it just makes
> things
> easier and a good habit in case you don't always send cover letters.
>
> I always use git send-email --annotate and manually add things like that to
> each patch before I send it. A bit of a hassle for the sender but makes the
> reviewer's life easier :)
>
> > -----Original Message-----
> > From: [email protected] [mailto:meta-arago-
> > [email protected]] On Behalf Of R, Karthik
> > Sent: Tuesday, September 02, 2014 5:55 AM
> > To: [email protected]
> > Subject: [meta-arago] [PATCH 00/12] Enabling WL8 R8.4 on dora
> >
> > This patch set contains the set of patches that are required to get
> > the latest Wilink firmware on the dora branch.
> > Most of the patches here are cherry picked from the master branch. A
> > few of them needed minor rework.
> >
> > Note that this has been tested on the GLSDK 6.10 release line for
> > dra7xx-evm as the target.
> >
> > Denys Dmytriyenko (4):
> > wl18xx-firmware: specify the branch being used for this version
> > hostap-daemon: specify the branch being used for this version
> > wpa-supplicant: specify the branch being used for this version
> > recipes-connectivity: remove remaining unnecessary exec permissions
> >
> > Yaniv Machani (8):
> > wpa-supplicant-wl18xx: Update recipe to ol_r8.a9.14 version.
> > hostap-daemon-wl18xx: Update recipe to ol_r8.a9.14 version
> > wl18xx : update to ol_r8.a9.14
> > Wl18xx : recipes update - tag changed to ol_r8.a9.14
> > wl18xx-target-scripts : Add new WiFi related scripts
> > wl18xx-compat: version update
> > wl18xx-wlconf: version update
> > wpa-supplicant-wl18xx: configuration files update
> >
> > ...synchronization-between-bluetoothd-and-dr.patch | 0
> > .../0001-obexd-make-OPP-push-timeout-longer.patch | 0
> > .../packagegroup-arago-tisdk-connectivity.bb | 4 +-
> > .../ti-compat-wireless-wl18xx_r8.a8.10.bb | 61 ---
> > .../ti-compat-wireless-wl18xx_r8.a9.14.bb | 51 ++
> > .../wl18xx-firmware/wl18xx-firmware_r8.a8.10.bb | 30 --
> > .../wl18xx-firmware/wl18xx-firmware_r8.a9.14.bb | 31 ++
> > .../hostap/hostap-daemon-wl18xx_r8.a8.10.bb | 23 -
> > .../hostap/hostap-daemon-wl18xx_r8.a9.14.bb | 24 +
> > .../hostap/hostap-daemon/defconfig | 2 +-
> > .../recipes-connectivity/hostap/hostap.inc | 7 +-
> > .../wl18xx-target-scripts_r8.a9.14.bb | 25 +
> > .../recipes-connectivity/wlconf/wlconf_r8.a8.10.bb | 41 --
> > .../recipes- connectivity/wlconf/wlconf_r8.a9.14.bb | 42 ++
> > .../wpa-supplicant/wpa- supplicant-wl18xx/defconfig | 506
> > -------------------
> > .../wpa-supplicant-wl18xx_r8.a8.10.bb | 24 -
> > .../wpa-supplicant-wl18xx_r8.a9.14.bb | 25 +
> > .../wpa-supplicant/wpa-supplicant.inc | 91 ++--
> > .../wpa-supplicant/wpa-supplicant/defaults-sane | 8 -
> > .../wpa-supplicant/wpa-supplicant/defconfig | 543
> > +++++++++++++++++++++
> > .../fi.epitest.hostap.WPASupplicant.service | 4 -
> > .../wpa-supplicant/fi.w1.wpa_supplicant1.service | 4 -
> > .../wpa-supplicant/p2p_supplicant.conf | 3 +-
> > .../wpa-supplicant/wpa_supplicant.conf | 3 +-
> > .../ti-wifi-utils/ti-wifi-utils-wl18xx_r8.a8.10.bb | 31 --
> > .../ti-wifi-utils/ti-wifi- utils-wl18xx_r8.a9.14.bb | 31 ++
> > 26 files changed, 814 insertions(+), 800 deletions(-) mode change
> > 100755 =>
> > 100644 meta-arago-distro/recipes-connectivity/bluez/bluez4/bluez4-fix-
> > synchronization-between-bluetoothd-and-dr.patch
> > mode change 100755 => 100644 meta-arago-distro/recipes-
> > connectivity/obexd/obexd-0.34/0001-obexd-make-OPP-push-timeout-
> > longer.patch
> > mode change 100644 => 100755 meta-arago-distro/recipes-
> > core/packagegroups/packagegroup-arago-tisdk-connectivity.bb
> > delete mode 100644
> > meta-arago-extras/recipes-bsp/ti-compat-wireless/ti-
> > compat-wireless-wl18xx_r8.a8.10.bb
> > create mode 100644
> > meta-arago-extras/recipes-bsp/ti-compat-wireless/ti-
> > compat-wireless-wl18xx_r8.a9.14.bb
> > delete mode 100644 meta-arago-extras/recipes-bsp/wl18xx-
> > firmware/wl18xx-firmware_r8.a8.10.bb
> > create mode 100644 meta-arago-extras/recipes-bsp/wl18xx-
> > firmware/wl18xx-firmware_r8.a9.14.bb
> > delete mode 100644 meta-arago-extras/recipes-
> > connectivity/hostap/hostap-daemon-wl18xx_r8.a8.10.bb
> > create mode 100644 meta-arago-extras/recipes-
> > connectivity/hostap/hostap-daemon-wl18xx_r8.a9.14.bb
> > create mode 100644 meta-arago-extras/recipes-connectivity/wl18xx-
> > target-scripts/wl18xx-target-scripts_r8.a9.14.bb
> > delete mode 100644 meta-arago-extras/recipes-
> > connectivity/wlconf/wlconf_r8.a8.10.bb
> > create mode 100644 meta-arago-extras/recipes-
> > connectivity/wlconf/wlconf_r8.a9.14.bb
> > delete mode 100755 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant-wl18xx/defconfig
> > delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant-wl18xx_r8.a8.10.bb
> > create mode 100644 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant-wl18xx_r8.a9.14.bb
> > delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/defaults-sane
> > create mode 100755 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/defconfig
> > delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/fi.epitest.hostap.WPASupplicant.service
> > delete mode 100644 meta-arago-extras/recipes-connectivity/wpa-
> > supplicant/wpa-supplicant/fi.w1.wpa_supplicant1.service
> > delete mode 100644
> > meta-arago-extras/recipes-devtools/ti-wifi-utils/ti-
> > wifi-utils-wl18xx_r8.a8.10.bb
> > create mode 100644
> > meta-arago-extras/recipes-devtools/ti-wifi-utils/ti-
> > wifi-utils-wl18xx_r8.a9.14.bb
> >
> > --
> > 2.0.1
> >
> > _______________________________________________
> > meta-arago mailing list
> > [email protected]
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
_______________________________________________
meta-arago mailing list
[email protected]
http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
