http://arago-project.org/pipermail/meta-arago/2015-May/005666.html
On Sat, Jun 13, 2015 at 10:38:46AM +1200, Ankur Tyagi wrote: > "With typos fixed" > > > Hi, > > I am trying to create tisdk rootfs image for AM335x EVM. > > Following are the steps are performed: > > git clone git://arago-project.org/git/projects/oe-layersetup.git fido > export > PATH=/opt/fido/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin:$PATH > cd fido > ./oe-layersetup.sh -f configs/arago-fido-config.txt > cd build > . conf/setenv > MACHINE=am335x-evm bitbake tisdk-rootfs-image > > This gave following error : > > NOTE: Started PRServer with DBfile: > /home/ankur/fido/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 53096, > PID: 3653 > ERROR: Layer 'networking-layer' depends on layer 'meta-python', but this > layer is not enabled in your configuration > > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > I then added meta-python in bblayers.conf > > /home/ankur/fido/sources/meta-openembedded/meta-python \ > > Again started bitbake > MACHINE=am335x-evm bitbake tisdk-rootfs-image > > and got this error > > ERROR: ParseError at > /home/ankur/fido/sources/meta-arago/meta-arago-extras/recipes-core/meta/ > external-arago-toolchain.bb:1: Could not include required file > recipes-core/eglibc/eglibc-package.inc > > Summary: There were 3 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > What wrong am I doing and how to fix it ? > > thanks > Ankur > > > > > On Sat, Jun 13, 2015 at 10:36 AM, Ankur Tyagi <[email protected]> > wrote: > > > > > Hi, > > > > I am trying to create tisdk rootfs image for AM335x EVM. > > > > Following are the steps are performed: > > > > git clone git://arago-project.org/git/projects/oe-layersetup.git fido > > export > > PATH=/opt/fido/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin:$PATH > > cd fido > > ./oe-layersetup.sh -f configs/arago-fido-conig.txt > > cd build > > . conf/setenv > > MACHINE=am335-evm bitbake tisdk-rootfs-image > > > > This gave following error : > > > > NOTE: Started PRServer with DBfile: > > /home/ankur/fido/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 53096, > > PID: 3653 > > ERROR: Layer 'networking-layer' depends on layer 'meta-python', but this > > layer is not enabled in your configuration > > > > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > I then added meta-python in bblayers.conf > > > > /home/ankur/fido/sources/meta-openembedded/meta-python \ > > > > Again started bitbake > > MACHINE=am335-evm bitbake tisdk-rootfs-image > > > > and got this error > > > > ERROR: ParseError at > > /home/ankur/fido/sources/meta-arago/meta-arago-extras/recipes-core/meta/ > > external-arago-toolchain.bb:1: Could not include required file > > recipes-core/eglibc/eglibc-package.inc > > > > Summary: There were 3 WARNING messages shown. > > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > What wrong am I doing and how to fix it ? > > > > thanks > > Ankur > > > _______________________________________________ > meta-arago mailing list > [email protected] > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago _______________________________________________ meta-arago mailing list [email protected] http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
