I'm trying X11. There are no more eventX under /dev/input. I get the following in dmesg: egalax_ts 1-0004: egalax_ts: failed to read firmware version egalax_ts: probe of 1-0004 failed with error -5
but I think that's expected, as this display uses a different touch controller. Thank you for your help!! -----Original Message----- From: Angolini Daiane-B19406 Sent: Wednesday, August 28, 2013 3:04 PM To: Sandoval Zazueta Francisco-B20593 Cc: [email protected] Subject: Re: [meta-freescale] Boundary Device's wvga parallel screen touch On 08/28/2013 04:03 PM, Sandoval Zazueta Francisco-B20593 wrote: > Hello! > > I found a thread looking around on touch screen working with community > yocto: > > http://comments.gmane.org/gmane.linux.embedded.yocto.meta-freescale/62 > > I'm trying to get touch to work with the same display on master. Did > you figure out the issue? I compiled the kernel with p1003 and > irq_set_irq_type. It compiles but touch still doesn't work. > Are you trying it for X11 or framebuffer only? > evtest gives the following output: > > root@imx6qsabreauto:~# evtest /dev/input/event0 > > Input driver version is 1.0.1 > > Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100 > > Input device name: "gpio-keys" gpio-keys? > > Supported events: > > Event type 0 (Sync) > > Event type 1 (Key) > > Event code 102 (Home) > > Event code 114 (VolumeDown) > > Event code 115 (VolumeUp) > > Event code 139 (Menu) > > Event code 158 (Back) > > Testing ... (interrupt to exit) Do you have another /dev/input/eventX to handle the touchscreen? > > With no response with random touches. > > Any hints will be appreciated! > > Regards, > > Paco S. > > > > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale > -- Daiane _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
