Hi Paco,
On 08/28/2013 12:03 PM, Sandoval Zazueta Francisco-B20593 wrote:
Hello!
I found a thread looking around on touch screen working with community
yocto:
http://comments.gmane.org/gmane.linux.embedded.yocto.meta-freescale/62
I'm trying to get touch to work with the same display on master. Did you
figure out the issue? I compiled the kernel with p1003 and
irq_set_irq_type. It compiles but touch still doesn't work.
evtest gives the following output:
root@imx6qsabreauto:~# evtest /dev/input/event0
SABRE Auto?
I didn't know you that had a matching connector.
If you're not running on our kernel (and board), you're going to need
a kernel patch: to add the driver:
https://github.com/boundarydevices/linux-imx6/commit/2b95627cceb68bb7a045215779fac3b1a9ef6e99
And some board glue like this in SABRE Auto:
https://github.com/boundarydevices/linux-imx6/blob/boundary-imx_3.0.35_4.0.0/arch/arm/mach-mx6/board-mx6_nitrogen6x.c#L636
(Oddly requires header file tsc2007.h and the tsc2007 data structur).
Regards,
Eric
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
