HI Alfonso, I was one of the people having problems in the other thread - I haven't tried getting it to work with the master branch but it did compile 5.1.1 successfully on dora a few days ago (just make sure that both meta-qt5 and the repo are both on dora). I had the problem with X11 as well and it turned out that it just needed to be reconfigured - I did a bitbake -c clean qt5, then recompiled it and it worked (note that if you have X11 removed it might error out before it does the clean - if so just comment out that line temporarily until you've cleaned it). Morgan
> Date: Fri, 20 Dec 2013 18:21:39 +0100 > From: [email protected] > To: [email protected] > Subject: Re: [meta-freescale] R: Qt5 with Yocto > > Il 20/12/2013 18:07, Simone ha scritto: > > Hello Alfonso, > > I tried to cross compile qt5 for imx6qsabresd following the article at > > http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard > > but I have an error during make. > > I'm able to build with bitbake, but not In this standard way. > > Below the last part of the build log (after configure, which was completed > > successfully). > > > Hi Simone, > take a look at the other thread and try using Qt-5.2 > I haven't had time to test it though... > > Ciao > -- > Marco > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
