Hello Alfonso, some steps are done.
Now the make can complete well. But make install fail, with this error: cannot find -lQt5Designer Here below the last part of the make output: /opt/poky/1.5mx6/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/ arm-poky-linux-gnueabi-g++ -Wl,-rpath-link,/home/cx/fsl-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib --sysroot=/home/cx/fsl-bsp/build/tmp/sysroots/imx6qsabresd -Wl,--no-undefined -Wl,-O1 -Wl,-rpath-link,/qt-everywhere-opensource-src-5.1.1/qtxmlpatterns/lib -Wl,-rpath-link,/qt-everywhere-opensource-src-5.1.1/qtbase/lib -shared -o libqdeclarativeview.so .obj/release-shared/qdeclarativeview_plugin.o .obj/release-shared/moc_qdeclarativeview_plugin.o -L/home/cx/fsl-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib -L/qt-everywhere-opensource-src-5.1.1/qttools/lib -lQt5Designer -L/qt-everywhere-opensource-src-5.1.1/qtbase/lib -L/qt-everywhere-opensource-src-5.1.1/qtquick1/lib -lQt5Declarative -L/qt-everywhere-opensource-src-5.1.1/qtxmlpatterns/lib -lQt5XmlPatterns -lQt5Network -lQt5Sql -L/qt-everywhere-opensource-src-5.1.1/qtscript/lib -lQt5Widgets -lQt5Xml -lQt5Script -lQt5Gui -lQt5Core -lGLESv2 -lEGL -lGAL -lpthread /opt/poky/1.5mx6/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/ ../../libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot find -lQt5Designer collect2: error: ld returned 1 exit status make[4]: *** [../../../plugins/designer/libqdeclarativeview.so] Error 1 make[4]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtquick1/src/plugins/qdeclarativeview' make[3]: *** [sub-qdeclarativeview-install_subtargets] Error 2 make[3]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtquick1/src/plugins' make[2]: *** [sub-plugins-install_subtargets-ordered] Error 2 make[2]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtquick1/src' make[1]: *** [sub-src-install_subtargets] Error 2 make[1]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtquick1' make: *** [module-qtquick1-install_subtargets] Error 2 Any suggestion? Thanks so much! Best regards Simone Da: Alfonso Tamés [mailto:[email protected]] Inviato: venerdì 20 dicembre 2013 19:12 A: Simone Cc: [email protected] Oggetto: Re: [meta-freescale] Qt5 with Yocto Priorità: Alta Hi Simone. <algorithm> is part of the Standard Template Library. I do not now how orthodox this may sound, but try tar czf the contents of your cortex-a9 sysroot located inside your cross toolchain Poky: (xxx because I dont remember the exact file names) /opt/poky/xxx/sysroots/cortex-a9xxx Then unpack the contents in your board sysroot (for wandboqard) yocto/build/tmp/sysroots/wandboard-quad This should put headers and libraries that are needed to cross compile since we are only passing the board sysroot to Qt5s configure script. Regards, Alfonso On Dec 20, 2013, at 11:07 AM, Simone <[email protected] <mailto:[email protected]> > wrote: Hello Alfonso, I tried to cross compile qt5 for imx6qsabresd following the article at http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard but I have an error during make. I'm able to build with bitbake, but not In this standard way. Below the last part of the build log (after configure, which was completed successfully). make[3]: Entering directory `/qt-everywhere-opensource-src-5.1.1/qtbase/src/corelib' /opt/poky/1.5mx6/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/ arm-poky-linux-gnueabi-g++ -c -pipe -mfloat-abi=softfp --sysroot=/home/alfonso/yocto/build/tmp/sysroots/wandboard-quad -O2 -O2 -mfloat-abi=hard -march=armv7-a -mfpu=neon -DLINUX=1 -DEGL_API_FB=1 -fvisibility=hidden -fvisibility-inlines-hidden -std=c++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_XCB -DQT_NO_XKBCOMMON -DQT_NO_USING_NAMESPACE -DQT_BUILD_CORE_LIB -DQT_BUILDING_QT -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRINGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x050000 -DPCRE_HAVE_CONFIG_H -astDQT_CORE_LIB -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -I../../mkspecs/devices/linux-imx6-g++ -I. -I../../include -I../../include/QtCore -I../../include/QtCore/5.1.1 -I../../include/QtCore/5.1.1/QtCore -Iglobal -I../3rdparty/pcre -I../3rdparty/harfbuzz/src -I../3rdparty/md5 -I../3rdparty/md4 -I../3rdparty/sha3 -I.moc/release-shared -I/home/alfonso/yocto/build/tmp/sysroots/wandboard-quad/usr/include -o .obj/release-shared/qabstractanimation.o animation/qabstractanimation.cpp Assembler messages: Fatal error: can't create .obj/release-shared/qabstractanimation.o: Permission denied In file included from ../../include/QtCore/qglobal.h:1:0, from ../../include/QtCore/../../src/corelib/global/qnamespace.h:45, from ../../include/QtCore/qnamespace.h:1, from ../../include/QtCore/../../src/corelib/kernel/qobjectdefs.h:45, from ../../include/QtCore/qobjectdefs.h:1, from ../../include/QtCore/../../src/corelib/kernel/qobject.h:48, from ../../include/QtCore/qobject.h:1, from animation/qabstractanimation.h:45, from animation/qabstractanimation.cpp:146: ../../include/QtCore/../../src/corelib/global/qglobal.h:80:21: fatal error: algorithm: No such file or directory #include <algorithm> ^ compilation terminated. make[3]: *** [.obj/release-shared/qabstractanimation.o] Error 2 make[3]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtbase/src/corelib' make[2]: *** [sub-corelib-make_first] Error 2 make[2]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtbase/src' make[1]: *** [sub-src-make_first] Error 2 make[1]: Leaving directory `/qt-everywhere-opensource-src-5.1.1/qtbase' make: *** [module-qtbase-make_first] Error 2 Any hints? Thanks Simone -----Messaggio originale----- Da: <mailto:[email protected]> [email protected] [ <mailto:[email protected]> mailto:[email protected]] Per conto di Alfonso Tamés Inviato: venerdì 13 dicembre 2013 12:18 A: <mailto:[email protected]> [email protected] Cc: <mailto:[email protected]> [email protected] Oggetto: Re: [meta-freescale] Qt5 with Yocto Hi Marco, Indeed, I tried repo init and sync the master branch today and it is throwing an error about sources/poky/meta/recipes-support/consolekit/consolekit_0.4.6.bb DEPENDS or requires virtual/libx11. This while explicit removing X11 in DISTRO_FEATURES_remove. Something got messed up in the last 15 days. I repo synced my yocto_dora directory and tested Qt5_CinematicExperience and works fine. Can you specify the errors in yocto_dora? Can you bitbake with the -v switch? Regards, Alfonso On Dec 13, 2013, at 2:32 AM, Marco < <mailto:[email protected]> [email protected]> wrote: Il 13/12/2013 00:19, Alfonso Tamés ha scritto: Marco, The instructions in <http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard should work for Dora and Master branches. Just remember that master is a moving target and sometimes it can give problems. Right now I am using Master without any problems. Regards, Hi Alfonso that's not true on my side. Unfortunately using master branch there is an error downloading the kernel. OTOH using dora branch there are errors launching the executables on the imx6dlsabresd target. -- Marco _______________________________________________ meta-freescale mailing list [email protected] <mailto:[email protected]> https://lists.yoctoproject.org/listinfo/meta-freescale
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
