On 2014-01-23 08:20, Alok Kumar wrote:
I have include meta-gnome in bblayer.conf, but I dont see any X server running.
what should I include in local.conf to get X running?
What image did you build? Something like core-image-sato or fsl-image-gui will
get you an X server running on your hardware.
n.b. please keep replies on the mailing list so that everyone can benefit.
On Thu, Jan 23, 2014 at 10:14 AM, Gary Thomas <[email protected]
<mailto:[email protected]>> wrote:
On 2014-01-23 08:08, Alok Kumar wrote:
Eric,
After building chromium, when I tried to launch it
find / -name "chrome*"
/usr/bin/chrome
/usr/bin/chrome/chrome_100___percent.pak
/usr/bin/chrome/chrome
/usr/bin/chrome/chrome.pak
I get following error.
/usr/bin/chrome/chrome
(chrome:2068): Gtk-WARNING **: cannot open display:
Any thoughts, what I am missing here.
Do you have X running?
If you tried to run this from outside the X desktop, you'll need to do
something like
DISPLAY=:0.0 /usr/bin/chrome/chrome
On Mon, Jan 20, 2014 at 10:14 PM, Eric Nelson <eric.nelson@boundarydevices.__com
<mailto:[email protected]> <mailto:eric.nelson@__boundarydevices.com
<mailto:[email protected]>>> wrote:
Hi Alok,
On 01/20/2014 09:44 AM, Alok Kumar wrote:
Hi Eric,
I am not sure if I understand it. my apology.
No sweat. Over a year in and I'm still figuring things out...
I am following this
http://wiki.wandboard.org/____index.php/Getting_started_____with_Yocto_on_Wandboard
<http://wiki.wandboard.org/__index.php/Getting_started___with_Yocto_on_Wandboard>
<http://wiki.wandboard.org/__index.php/Getting_started___with_Yocto_on_Wandboard
<http://wiki.wandboard.org/index.php/Getting_started_with_Yocto_on_Wandboard>>
and took stable dora branch.
I'd start with Daiane's docs on i.MX Community:
http://layers.openembedded.____org/layerindex/branch/master/____layer/meta-gnome/
<http://layers.openembedded.__org/layerindex/branch/master/__layer/meta-gnome/
<http://layers.openembedded.org/layerindex/branch/master/layer/meta-gnome/>>
And O.S.Systems that describes how to specifically build for
Nitrogen6x:
http://www.ossystems.com.br/____blog/2013/04/15/yocto-with-____boundary-devices-nitrogen6x-5-____steps-only.html
<http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__boundary-devices-nitrogen6x-5-__steps-only.html>
<http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__boundary-devices-nitrogen6x-5-__steps-only.html
<http://www.ossystems.com.br/blog/2013/04/15/yocto-with-boundary-devices-nitrogen6x-5-steps-only.html>>
Make sure you use the "dora" branch instead of "dylan" though.
Now if I want to try chromium" beta,
a) should I got to development branch first and get everything
from below.
repo init -u
https://github.com/Freescale/____fsl-community-bsp-platform
<https://github.com/Freescale/__fsl-community-bsp-platform>
<https://github.com/Freescale/__fsl-community-bsp-platform
<https://github.com/Freescale/fsl-community-bsp-platform>> -b master
Again, you should stick with "Dora" unless you need something
specific in "master".
b) apply chromium recipe on this build and build the image.
After the repo sync, you'll need to pull in the meta-browser
layer:
~/yocto/sources$ git clone
git://github.com/OSSystems/____meta-browser.git
<http://github.com/OSSystems/__meta-browser.git>
<http://github.com/OSSystems/__meta-browser.git
<http://github.com/OSSystems/meta-browser.git>>
And you'll need to add meta-browser and meta-gnome to your
conf/bblayers.conf file:
BBLAYERS = " \
...
${BSPDIR}/sources/meta-____openembedded/meta-gnome \
${BSPDIR}/sources/meta-browser \
...
"
And finally, you'll need to pull it into your build.
The easy way is to add this to your local.conf file:
IMAGE_INSTALL += " \
chromium \
"
I'm not sure why, but when I went through these steps,
I got complaints about the license for libav and
was prompted to add this to local.conf:
LICENSE_FLAGS_WHITELIST = "commercial"
I think there's something screwy with that, though.
The recipes in poky/meta/recipes-multimedia/____libav/
appear to have a combination of GPL and LGPL
licenses.
c) where should I test this on Sabrelite or nitorgen6x ?
We recommend the use of "nitrogen6x" for the MACHINE type.
The resulting image will run on either the SABRE Lite
or Nitrogen6X boards.
Regards,
Eric
--
Regards
Alok Kumar
_________________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.__org
<mailto:[email protected]>
https://lists.yoctoproject.__org/listinfo/meta-freescale
<https://lists.yoctoproject.org/listinfo/meta-freescale>
--
------------------------------__------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------__------------------------------
_________________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.__org <mailto:[email protected]>
https://lists.yoctoproject.__org/listinfo/meta-freescale
<https://lists.yoctoproject.org/listinfo/meta-freescale>
--
Regards
Alok Kumar
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
