Oh I think I was building core-image-base. Will check this out.
On Thu, Jan 23, 2014 at 11:06 AM, Gary Thomas <[email protected]> wrote: > On 2014-01-23 08:20, Alok Kumar wrote: > >> I have include meta-gnome in bblayer.conf, but I dont see any X server >> running. >> >> what should I include in local.conf to get X running? >> > > What image did you build? Something like core-image-sato or fsl-image-gui > will > get you an X server running on your hardware. > > n.b. please keep replies on the mailing list so that everyone can benefit. > > On Thu, Jan 23, 2014 at 10:14 AM, Gary Thomas <[email protected] <mailto: >> [email protected]>> wrote: >> >> On 2014-01-23 08:08, Alok Kumar wrote: >> >> Eric, >> >> After building chromium, when I tried to launch it >> >> find / -name "chrome*" >> /usr/bin/chrome >> /usr/bin/chrome/chrome_100___percent.pak >> >> /usr/bin/chrome/chrome >> /usr/bin/chrome/chrome.pak >> >> I get following error. >> /usr/bin/chrome/chrome >> >> (chrome:2068): Gtk-WARNING **: cannot open display: >> >> Any thoughts, what I am missing here. >> >> >> Do you have X running? >> >> If you tried to run this from outside the X desktop, you'll need to >> do something like >> DISPLAY=:0.0 /usr/bin/chrome/chrome >> >> >> On Mon, Jan 20, 2014 at 10:14 PM, Eric Nelson >> <eric.nelson@boundarydevices.__com <mailto:eric.nelson@ >> boundarydevices.com> <mailto:eric.nelson@__boundarydevices.com >> >> <mailto:[email protected]>>> wrote: >> >> Hi Alok, >> >> >> On 01/20/2014 09:44 AM, Alok Kumar wrote: >> >> Hi Eric, >> >> I am not sure if I understand it. my apology. >> >> >> No sweat. Over a year in and I'm still figuring things out... >> >> >> I am following this >> http://wiki.wandboard.org/____index.php/Getting_started_____ >> with_Yocto_on_Wandboard <http://wiki.wandboard.org/__ >> index.php/Getting_started___with_Yocto_on_Wandboard> >> >> <http://wiki.wandboard.org/__index.php/Getting_started___ >> with_Yocto_on_Wandboard <http://wiki.wandboard.org/ >> index.php/Getting_started_with_Yocto_on_Wandboard>> >> >> >> and took stable dora branch. >> >> >> I'd start with Daiane's docs on i.MX Community: >> >> http://layers.openembedded.____org/layerindex/branch/master/____layer/meta-gnome/ >> <http://layers.openembedded.__org/layerindex/branch/master/_ >> _layer/meta-gnome/ >> >> <http://layers.openembedded.org/layerindex/branch/master/ >> layer/meta-gnome/>> >> >> >> And O.S.Systems that describes how to specifically build for >> Nitrogen6x: >> http://www.ossystems.com.br/____blog/2013/04/15/yocto-with-_ >> ___boundary-devices-nitrogen6x-5-____steps-only.html >> <http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__ >> boundary-devices-nitrogen6x-5-__steps-only.html> >> >> >> <http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__ >> boundary-devices-nitrogen6x-5-__steps-only.html >> <http://www.ossystems.com.br/blog/2013/04/15/yocto-with- >> boundary-devices-nitrogen6x-5-steps-only.html>> >> >> Make sure you use the "dora" branch instead of "dylan" >> though. >> >> >> Now if I want to try chromium" beta, >> a) should I got to development branch first and get >> everything from below. >> >> repo init -u >> https://github.com/Freescale/____fsl-community-bsp-platform < >> https://github.com/Freescale/__fsl-community-bsp-platform> >> >> <https://github.com/Freescale/__fsl-community-bsp-platform < >> https://github.com/Freescale/fsl-community-bsp-platform>> -b master >> >> >> >> Again, you should stick with "Dora" unless you need something >> specific in "master". >> >> >> b) apply chromium recipe on this build and build the >> image. >> >> >> After the repo sync, you'll need to pull in the meta-browser >> layer: >> ~/yocto/sources$ git clone git:// >> github.com/OSSystems/____meta-browser.git <http://github.com/OSSystems/_ >> _meta-browser.git> >> <http://github.com/OSSystems/__meta-browser.git < >> http://github.com/OSSystems/meta-browser.git>> >> >> >> >> And you'll need to add meta-browser and meta-gnome to your >> conf/bblayers.conf file: >> >> BBLAYERS = " \ >> ... >> ${BSPDIR}/sources/meta-____openembedded/meta-gnome \ >> >> >> ${BSPDIR}/sources/meta-browser \ >> ... >> " >> >> And finally, you'll need to pull it into your build. >> The easy way is to add this to your local.conf file: >> >> IMAGE_INSTALL += " \ >> chromium \ >> " >> >> I'm not sure why, but when I went through these steps, >> I got complaints about the license for libav and >> was prompted to add this to local.conf: >> >> LICENSE_FLAGS_WHITELIST = "commercial" >> >> I think there's something screwy with that, though. >> The recipes in poky/meta/recipes-multimedia/____libav/ >> >> >> appear to have a combination of GPL and LGPL >> licenses. >> >> >> c) where should I test this on Sabrelite or nitorgen6x ? >> >> >> We recommend the use of "nitrogen6x" for the MACHINE type. >> The resulting image will run on either the SABRE Lite >> or Nitrogen6X boards. >> >> Regards, >> >> >> Eric >> >> >> >> >> -- >> Regards >> Alok Kumar >> >> >> _________________________________________________ >> meta-freescale mailing list >> meta-freescale@yoctoproject.__org <mailto:meta-freescale@ >> yoctoproject.org> >> https://lists.yoctoproject.__org/listinfo/meta-freescale < >> https://lists.yoctoproject.org/listinfo/meta-freescale> >> >> >> -- >> ------------------------------__------------------------------ >> >> Gary Thomas | Consulting for the >> MLB Associates | Embedded world >> ------------------------------__------------------------------ >> >> _________________________________________________ >> meta-freescale mailing list >> meta-freescale@yoctoproject.__org <mailto:meta-freescale@ >> yoctoproject.org> >> https://lists.yoctoproject.__org/listinfo/meta-freescale < >> https://lists.yoctoproject.org/listinfo/meta-freescale> >> >> >> >> >> -- >> Regards >> Alok Kumar >> > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > -- Regards Alok Kumar
_______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
