List:
I've built the Freescale imx6 beta successfully from:
fsl-yocto-3.10.17-1.0.0-beta.tar.gz
L3.10.17_1.0.0_beta_131223_images_MX6.tar.gz
cd fsl-community-bsp-platform &&\
MACHINE=imx6slevk source setup-environment build-evk &&\
bitbake core-image-minimal
I have a question about sd card partitioning. The instructions in
Freescale Yocto user guide 4.1 say:
sudo dd if=<image name>.sdcard of=/dev/sd<partition>
sudo dd if=<image name>.sdcard of=/dev/sd<partition bs=1M && sync
No where can I find the partitioning requirements for the sd card.
How is the SD card to be partitioned?
Don't really understand the two commands above. Unless <partition> is
different, only difference is block size of writes
Can someone point me to the partitioning requirements?
thx
tom campbell
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
