On 2014-05-22 09:33, tom campbell wrote:
List:I've built the Freescale imx6 beta successfully from: fsl-yocto-3.10.17-1.0.0-beta.tar.gz L3.10.17_1.0.0_beta_131223_images_MX6.tar.gz cd fsl-community-bsp-platform &&\ MACHINE=imx6slevk source setup-environment build-evk &&\ bitbake core-image-minimal I have a question about sd card partitioning. The instructions in Freescale Yocto user guide 4.1 say: sudo dd if=<image name>.sdcard of=/dev/sd<partition> sudo dd if=<image name>.sdcard of=/dev/sd<partition bs=1M && sync No where can I find the partitioning requirements for the sd card. How is the SD card to be partitioned? Don't really understand the two commands above. Unless <partition> is different, only difference is block size of writes Can someone point me to the partitioning requirements?
You don't need to partition the SD card - the image is complete, with it's own partitioning built in. Those directions are a bit misleading as it should read of=/dev/sdX, where sdX is the name of your SD device; you should never use a partition device here, rather the entire device. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
