On Mon, Sep 15, 2014 at 4:49 PM, Otavio Salvador <[email protected]> wrote: > This updates the 2014.07-based branch with more backports from the > 2014.10 upcoming release. The following changes are included: > > 53cd36b imx: mx6slevk: Change to use generic board > 987efad imx: mx6q/dlarm2: Change to use generic board > 0207052 README.imximage: Fix the maximum DCD size > 13e94fe imx: Fix build of mx6sxsabresd > 318d1cd mx6sxsabresd: Add PCI support > 919802d pcie_imx: Add mx6solox support > 847d6ce mx6: imx-regs: Provide a structure for GPC registers > f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts > f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings > to be filesystem independent > e45540b arm: vf610: lpuart: disable FIFO on initializaton > 11571b6 arm: vf610: lpuart: fix status register handling > 09e81f4 mx6: Fix ECSPI typo in soc_boot_modes > b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot > 228135e iMX6: Disable the L2 before chaning the PL310 latency > 45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6 > 9f3f181 pci: add support for board_pci_fixup_dev function > 4ecf3e6 arm: mx6: add get_cpu_type() > b6faaf1 arm: mx6: ddr: fix cs0_end calculation > 07917e7 arm: mx6: ddr: configure MMDC for slow_pd > 66b2f14 arm: mx6: ddr: do not write into reserved bit > b3f847e arm: mx6: ddr: cleanup > eba02a9 i2c: imx: add macros to setup pads for multiple SoC types > e50e740 sata: dwc_ahsata: implement sata_port_status > a45361d compulab: eeprom: add support for defining eeprom i2c bus > 8f82ddd mx6: add clock enabling functions > 5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR > d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox > fca8b5a usb: ci_udc: implement dfu_usb_get_reset > 7baddea arm: Add missing .vectors section to linker scripts > 324df11 arm: vf610: add NFC clock support > 10c68b2 arm: vf610: add NFC pin mux > 9bba571 ARM: Fix overflow in MMU setup > 7be9add api: fix build without CMD_NET support > 8a9e527 e1000: add i210 support > dcd2c8c e1000: Implement dcache support > > Signed-off-by: Otavio Salvador <[email protected]> > --- > Changes since v1: > - Update to a newer revision to fix build failure on mx6sxsabresd board.
I am intending to merge this to master soon but I were expecting maintainers to Acked-by it after doing the tests in their boards. Can this be done? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
