On Mon, Sep 15, 2014 at 4:50 PM, Otavio Salvador <[email protected]> wrote:
> On Mon, Sep 15, 2014 at 4:49 PM, Otavio Salvador > <[email protected]> wrote: > > This updates the 2014.07-based branch with more backports from the > > 2014.10 upcoming release. The following changes are included: > > > > 53cd36b imx: mx6slevk: Change to use generic board > > 987efad imx: mx6q/dlarm2: Change to use generic board > > 0207052 README.imximage: Fix the maximum DCD size > > 13e94fe imx: Fix build of mx6sxsabresd > > 318d1cd mx6sxsabresd: Add PCI support > > 919802d pcie_imx: Add mx6solox support > > 847d6ce mx6: imx-regs: Provide a structure for GPC registers > > f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts > > f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env > settings to be filesystem independent > > e45540b arm: vf610: lpuart: disable FIFO on initializaton > > 11571b6 arm: vf610: lpuart: fix status register handling > > 09e81f4 mx6: Fix ECSPI typo in soc_boot_modes > > b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot > > 228135e iMX6: Disable the L2 before chaning the PL310 latency > > 45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6 > > 9f3f181 pci: add support for board_pci_fixup_dev function > > 4ecf3e6 arm: mx6: add get_cpu_type() > > b6faaf1 arm: mx6: ddr: fix cs0_end calculation > > 07917e7 arm: mx6: ddr: configure MMDC for slow_pd > > 66b2f14 arm: mx6: ddr: do not write into reserved bit > > b3f847e arm: mx6: ddr: cleanup > > eba02a9 i2c: imx: add macros to setup pads for multiple SoC types > > e50e740 sata: dwc_ahsata: implement sata_port_status > > a45361d compulab: eeprom: add support for defining eeprom i2c bus > > 8f82ddd mx6: add clock enabling functions > > 5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR > > d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox > > fca8b5a usb: ci_udc: implement dfu_usb_get_reset > > 7baddea arm: Add missing .vectors section to linker scripts > > 324df11 arm: vf610: add NFC clock support > > 10c68b2 arm: vf610: add NFC pin mux > > 9bba571 ARM: Fix overflow in MMU setup > > 7be9add api: fix build without CMD_NET support > > 8a9e527 e1000: add i210 support > > dcd2c8c e1000: Implement dcache support > > > > Signed-off-by: Otavio Salvador <[email protected]> > > --- > > Changes since v1: > > - Update to a newer revision to fix build failure on mx6sxsabresd board. > > I am intending to merge this to master soon but I were expecting > maintainers to Acked-by it after doing the tests in their boards. > > Can this be done? imx6qsabresd is fine. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
