On Tue, Sep 16, 2014 at 10:25 AM, Jacob Pedersen <[email protected]> wrote: > Hi folks, > > > > I'm using a OmniVision OV5640 MIPI-CSI2 image sensor with a iMX6 Quad board, > and I'm doing some computer vision applications. I'm curious to know why the > driver for the OV5640 sensor is limited to 30 fps, even though the sensor > can do 60 fps at 720p and 90 fps at VGA? As far as I can see in the driver, > the frame rate is clamped to maximum 30 fps. > > > > Is there a technical reason, or is it just because it hasn't been updated > for all the supported modes? > > > > The driver also limits the available image formats, which makes one required > to do the conversion in software or (as in my case) using the IPU. The IPU > is fairly fast to do the simple UYVY to RGB24 conversion, but still slower > than just getting an RGB image from the sensor.
This limitation is due to the camera device driver. Only few configurations are implemented. Daiane -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
