On 09/16/2014 06:43 AM, Daiane Angolini wrote: > On Tue, Sep 16, 2014 at 10:25 AM, Jacob Pedersen <[email protected]> > wrote: >> Hi folks, >> >> >> >> I'm using a OmniVision OV5640 MIPI-CSI2 image sensor with a iMX6 Quad board, >> and I'm doing some computer vision applications. I'm curious to know why the >> driver for the OV5640 sensor is limited to 30 fps, even though the sensor >> can do 60 fps at 720p and 90 fps at VGA? As far as I can see in the driver, >> the frame rate is clamped to maximum 30 fps. >> >> >> >> Is there a technical reason, or is it just because it hasn't been updated >> for all the supported modes? >> >> >> >> The driver also limits the available image formats, which makes one required >> to do the conversion in software or (as in my case) using the IPU. The IPU >> is fairly fast to do the simple UYVY to RGB24 conversion, but still slower >> than just getting an RGB image from the sensor. > > This limitation is due to the camera device driver. Only few > configurations are implemented. >
Those I2C blobs are pretty difficult to get right! Regards, Eric -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
