On Thu, Dec 3, 2015 at 2:47 PM, Max Krummenacher <[email protected]> wrote: > This recipe provides a kernel for the Freescale i.MX 6 based modules > Colibri iMX6 and Apalis iMX6. > > - based on Freescale's BSP release imx_3.14.28_1.0.0_ga release and patches > from Boundary Devices > - GPIOlib /sys/class/gpio > - PWM LEDs /sys/class/leds/ > - temperature sensor CPU /sys/devices/virtual/thermal/thermal_zone0/temp > board: > /sys/devices/soc0/soc.1/2100000.aips-bus/21a4000.i2c/i2c-1/1-0041/stmpe-adc/iio:device0/in_temp8_raw > - Ethernet > - eMMC/SD/MMC > - serial console debug UART1 > - UARTs > - I2C via /dev/i2c-X > - framebuffer console > - HDMI audio > - analogue audio playback and capture, resistive touch > - S/PDIF > - SPI via /dev/spidev > - serial number and board revision > - USB host port > - USB device Ethernet RNDIS > - automatic USB device/host switching > - analog input via IIO framework > - parallel camera interface > - DVFS power management > - suspend LP1 > - watchdog > Apalis only > - CAN on via can0 and can1 > - PCIe (regular ports and mini-PCIe slot) > - SATA (regular port or mSATA slot) > > Signed-off-by: Max Krummenacher <[email protected]>
I saw you have two defconfig files. If this is really need, please split the commit on two. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
