I build an embedded linux with YOCTO for the KARO TX6S-8035 target. I use the fsl yocto project <https://www.karo-electronics.com/1646.html?&L=1> given by KARO. I use the Mfgtools-TX6-2018-01 tool to flash images into the board but when i boot the device i have the following error: *Kernel panic - not syncing: Requested init /linuxrc failed (error -2)*. How can i fix this?
Here is the result of printenv from U-BOOT: printenv <https://pastebin.com/7jvaM0wV> And the serial output from the board: serial output <https://pastebin.com/amumfBvJ>
-- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale