On Tue, Mar 20, 2018 at 6:20 AM, vlad zouth <[email protected]> wrote: > I build an embedded linux with YOCTO for the KARO TX6S-8035 target. I use > the fsl yocto project given by KARO. > I use the Mfgtools-TX6-2018-01 tool to flash images into the board but when > i boot the device i have the following error: > Kernel panic - not syncing: Requested init /linuxrc failed (error -2). > How can i fix this? > > Here is the result of printenv from U-BOOT: printenv > And the serial output from the board: serial output
I am sorry but as you are using their fork, please contact their support. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
