Does your board startup via EFI or legacy BIOS? Try toggling it if you can.
Thanks,
Cal
On 03/27/2018 11:03 PM, Mohammad, Jamal M wrote:
Hi Guys,
1.Created an minimal yocto image using "bitbake core-image-minimal"
command
2. Flashed the USB using the dd command.
sudo dd
if=tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg
of=/dev/sdb
3.Clicked on install and typed “sda”
4.The installation was successful and when I tried to restart by
removing the USB Drive, it says “No boot options found. Please install
bootable media and restart."
What is the mistake I am doing here.
If I boot from USB, it works and there is no issue, I am able to login
into the system. Also after flashing I checked the sda1 sda2 with
bootable USB, sda1 has boot partition and sda2 has root partition..
I am trying this on Braswell based board ( Intel Celeron N3160 )
Thanks and Regards,
Jamal
--
_______________________________________________
meta-intel mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-intel
