It's EFI, Doesn't work with Legacy, since it has bootx64.efi in the first partition.
What is the difference between .hddimg and .wic format. From: Cal Sullivan [mailto:[email protected]] Sent: Thursday, March 29, 2018 12:09 AM To: Mohammad, Jamal M <[email protected]>; [email protected] Subject: Re: [meta-intel] Unable to install the image on the hard disk Does your board startup via EFI or legacy BIOS? Try toggling it if you can. Thanks, Cal On 03/27/2018 11:03 PM, Mohammad, Jamal M wrote: Hi Guys, 1. Created an minimal yocto image using "bitbake core-image-minimal" command 1. Flashed the USB using the dd command. sudo dd if=tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg of=/dev/sdb 3. Clicked on install and typed "sda" 4. The installation was successful and when I tried to restart by removing the USB Drive, it says "No boot options found. Please install bootable media and restart." What is the mistake I am doing here. If I boot from USB, it works and there is no issue, I am able to login into the system. Also after flashing I checked the sda1 sda2 with bootable USB, sda1 has boot partition and sda2 has root partition.. I am trying this on Braswell based board ( Intel Celeron N3160 ) Thanks and Regards, Jamal
-- _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
