Reviewed-by: Jonathan Cormier <[email protected]>

On Wed, Apr 24, 2024, 12:36 PM Denys Dmytriyenko via lists.yoctoproject.org
<[email protected]> wrote:

> From: Denys Dmytriyenko <[email protected]>
>
> Separate FAT boot partition holds SPL, SYSFW and U-boot images, while
> rootfs places kernel images and DTBs into /boot directory. So it is not
> desirable to mount boot FAT partition into /boot directory of the rootfs
> and shadow its original content - adjust corresponding entry in wic
> templates.
>
> While at it, remove unused ondisk parameter when using use-uuid, which
> takes precedence and is more flexible.
>
> Note: boot FAT partition will be automounted at /run/media/boot-mmcblk0p1/
>
> Signed-off-by: Denys Dmytriyenko <[email protected]>
> ---
> v2 changes:
> * remove <mountpoint> from boot partition to avoid undocumented behavior
> * add explicit size specifier to --fixed-size 128M
>
>  meta-ti-bsp/wic/sdimage-2part-efi.wks.in | 3 ++-
>  meta-ti-bsp/wic/sdimage-2part.wks        | 4 ++--
>  2 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/meta-ti-bsp/wic/sdimage-2part-efi.wks.in b/meta-ti-bsp/wic/
> sdimage-2part-efi.wks.in
> index 2213a348..ca042be1 100644
> --- a/meta-ti-bsp/wic/sdimage-2part-efi.wks.in
> +++ b/meta-ti-bsp/wic/sdimage-2part-efi.wks.in
> @@ -2,6 +2,7 @@
>  # long-description: Creates a partitioned SD card image for TI platforms
> that
>  # supports EFI.  Boot files are located in the first vfat partition with
> extra
>  # reserved space.  We cannot use a GPT here.
> +
>  bootloader --timeout=3 --append="rootfstype=ext4"
> -part /boot --source bootimg-efi --sourceparams="loader=${EFI_PROVIDER}"
> --fstype=vfat --label boot --active --align 1024 --use-uuid --fixed-size
> 128M
> +part --source bootimg-efi --sourceparams="loader=${EFI_PROVIDER}"
> --fstype=vfat --label boot --active --align 1024 --use-uuid --fixed-size
> 128M
>  part / --source rootfs --fstype=ext4 --label root --align 1024 --use-uuid
> diff --git a/meta-ti-bsp/wic/sdimage-2part.wks
> b/meta-ti-bsp/wic/sdimage-2part.wks
> index 3eab9407..5073176e 100644
> --- a/meta-ti-bsp/wic/sdimage-2part.wks
> +++ b/meta-ti-bsp/wic/sdimage-2part.wks
> @@ -2,5 +2,5 @@
>  # long-description: Creates a partitioned SD card image for TI platforms.
>  # Boot files are located in the first vfat partition with extra reserved
> space.
>
> -part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat
> --label boot --active --align 1024 --fixed-size 128 --use-uuid
> -part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label root
> --align 1024 --use-uuid
> +part --source bootimg-partition --fstype=vfat --label boot --active
> --align 1024 --use-uuid --fixed-size 128M
> +part / --source rootfs --fstype=ext4 --label root --align 1024 --use-uuid
> --
> 2.25.1
>
>
> 
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#17599): 
https://lists.yoctoproject.org/g/meta-ti/message/17599
Mute This Topic: https://lists.yoctoproject.org/mt/105720331/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub 
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to