Ryan, Will you be able to pick up v2 of this? Thanks.
On Wed, Apr 24, 2024 at 12:46:48PM -1000, Jon Cormier wrote: > Reviewed-by: Jonathan Cormier <[email protected]> > > On Wed, Apr 24, 2024, 12:36 PM Denys Dmytriyenko via lists.yoctoproject.org > <[email protected]> wrote: > > > From: Denys Dmytriyenko <[email protected]> > > > > Separate FAT boot partition holds SPL, SYSFW and U-boot images, while > > rootfs places kernel images and DTBs into /boot directory. So it is not > > desirable to mount boot FAT partition into /boot directory of the rootfs > > and shadow its original content - adjust corresponding entry in wic > > templates. > > > > While at it, remove unused ondisk parameter when using use-uuid, which > > takes precedence and is more flexible. > > > > Note: boot FAT partition will be automounted at /run/media/boot-mmcblk0p1/ > > > > Signed-off-by: Denys Dmytriyenko <[email protected]> > > --- > > v2 changes: > > * remove <mountpoint> from boot partition to avoid undocumented behavior > > * add explicit size specifier to --fixed-size 128M > > > > meta-ti-bsp/wic/sdimage-2part-efi.wks.in | 3 ++- > > meta-ti-bsp/wic/sdimage-2part.wks | 4 ++-- > > 2 files changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/meta-ti-bsp/wic/sdimage-2part-efi.wks.in b/meta-ti-bsp/wic/ > > sdimage-2part-efi.wks.in > > index 2213a348..ca042be1 100644 > > --- a/meta-ti-bsp/wic/sdimage-2part-efi.wks.in > > +++ b/meta-ti-bsp/wic/sdimage-2part-efi.wks.in > > @@ -2,6 +2,7 @@ > > # long-description: Creates a partitioned SD card image for TI platforms > > that > > # supports EFI. Boot files are located in the first vfat partition with > > extra > > # reserved space. We cannot use a GPT here. > > + > > bootloader --timeout=3 --append="rootfstype=ext4" > > -part /boot --source bootimg-efi --sourceparams="loader=${EFI_PROVIDER}" > > --fstype=vfat --label boot --active --align 1024 --use-uuid --fixed-size > > 128M > > +part --source bootimg-efi --sourceparams="loader=${EFI_PROVIDER}" > > --fstype=vfat --label boot --active --align 1024 --use-uuid --fixed-size > > 128M > > part / --source rootfs --fstype=ext4 --label root --align 1024 --use-uuid > > diff --git a/meta-ti-bsp/wic/sdimage-2part.wks > > b/meta-ti-bsp/wic/sdimage-2part.wks > > index 3eab9407..5073176e 100644 > > --- a/meta-ti-bsp/wic/sdimage-2part.wks > > +++ b/meta-ti-bsp/wic/sdimage-2part.wks > > @@ -2,5 +2,5 @@ > > # long-description: Creates a partitioned SD card image for TI platforms. > > # Boot files are located in the first vfat partition with extra reserved > > space. > > > > -part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat > > --label boot --active --align 1024 --fixed-size 128 --use-uuid > > -part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label root > > --align 1024 --use-uuid > > +part --source bootimg-partition --fstype=vfat --label boot --active > > --align 1024 --use-uuid --fixed-size 128M > > +part / --source rootfs --fstype=ext4 --label root --align 1024 --use-uuid > > -- > > 2.25.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#17604): https://lists.yoctoproject.org/g/meta-ti/message/17604 Mute This Topic: https://lists.yoctoproject.org/mt/105720331/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
