On 22/05/12 17:31, Denys Dmytriyenko wrote:
On Tue, May 22, 2012 at 05:03:53PM +0100, Jack Mitchell wrote:
On 22/05/12 16:57, Gary Thomas wrote:
On 2012-05-22 09:48, Jack Mitchell wrote:
Hi,
I am currently trying to boot my beagleboard with a mix of
Poky/Meta-ti/meta-oe, I can build the image without error
however when I start booting the board the kernel gets to
'freeing init memory' and seems to hang, although the beaglebone
light is still flashing and it will still accept keystrokes.
Could anyone shed any light on the situation?
I am on the denzil branch for all three repositories.
I have tried with USB only and USB + AC Adapter.
What image did you use?
core-image-minimal - it does have a few extra programs added via
IMAGE_INSTALL but they are userspace only so shouldn't be affecting
the boot.
Couple suggestions:
1. What's your init system? Since you have meta-oe mixed with poky, check if
there are any problems with sysvinit or systemd, in case there is some mix up
or confusion between those two...
2. Check your /etc/inittab for the correct tty used for getty, but it doesn't
look like it reaches the prompt yet...
I am using Poky defaults so I assume it will be sysvinit... however I
did see systemd being built, what would be the outline procedure to
check that mixing of systems isn't occurring? None of my reciepes have
systemd support, but I assume something being pulled in from meta-oe does...
My getty is being pushed to ttyO0, is this correct for the beaglebone?
Thanks,
Jack.
--
Jack Mitchell ([email protected])
Embedded Systems Engineer
http://www.embed.me.uk
--
_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti
