On Tue, Feb 26, 2013 at 01:42:31PM -0500, Murali Karicheri wrote: > Denys, > > I understand that this recipe is not complete as u-boot_2013.01.bb > may be shared by other machines and this change is not applicable. > Do I need to add this to some other file? Please advise. > > Meanwhile for the release this should work as this is going into > mcsdk meta-ti repo. But to push this to meta-ti, the above change is > needed and hence need your input.
Murali, I know Carlos has been working on adding SPL support to u-boot already: http://arago-project.org/pipermail/meta-arago/2013-February/000937.html Can you sync up with him and come up with a unified solution for both SPL and GPH images that works for everybody and I'd be happy to push it to meta-ti. Also, I'd like to hear Tom's opinion on this, as current U-Boot maintainer - if there is a better approach to this exists or planned in mainline. Thanks. -- Denys > On 2/26/2013 1:38 PM, Murali Karicheri wrote: > >On Keystone EVM, u-boot build needs to create following additional > >binaries and images > > - u-boot-spl.bin > > - This for first stage boot from SPI NOR flash > > - u-boot.img > > - This is the second stage u-boot image in uImage format. > > - u-boot-spi.gph > > - This combines the above two images into one image so that > > it is easy to program on the device. > > > >Signed-off-by: Murali Karicheri <[email protected]> > >--- > > SRC_URI and SRCREV will be replaced before pushing this recipe to repo. > > recipes-bsp/u-boot/u-boot_2013.01.bb | 64 > > ++++++++++++++++++++++++++++++++-- > > 1 file changed, 62 insertions(+), 2 deletions(-) > > > >diff --git a/recipes-bsp/u-boot/u-boot_2013.01.bb > >b/recipes-bsp/u-boot/u-boot_2013.01.bb > >index b9e6daf..07e8d6e 100644 > >--- a/recipes-bsp/u-boot/u-boot_2013.01.bb > >+++ b/recipes-bsp/u-boot/u-boot_2013.01.bb > >@@ -10,14 +10,74 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" > > PR = "r2+gitr${SRCPV}" > >-SRC_URI = > >"git://arago-project.org/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}" > >+#SRC_URI = > >"git://arago-project.org/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}" > >+SRC_URI = > >"git://gtgit01.gt.design.ti.com/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}" > > BRANCH = "master" > >-SRCREV = "DEV.MCSDK-03.00.00.07" > >+#SRCREV = "DEV.MCSDK-03.00.00.08" > >+SRCREV = "327e9f591d6530650609915c7c35c874bfc25550" > > EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc > > ${TOOLCHAIN_OPTIONS}"' > > S = "${WORKDIR}/git" > > UBOOT_SUFFIX = "bin" > >+ > >+UBOOT_MAKE_TARGET = "u-boot-spi.gph" > >+# SPI NOR Flash binaries > >+UBOOT_SPI_SPL_BINARY = "u-boot-spl.bin" > >+UBOOT_SPI_BINARY = "u-boot.img" > >+UBOOT_SPI_GPH_BINARY = "u-boot-spi.gph" > >+# SPI NOR Flash deployed images > >+UBOOT_SPI_SPL_IMAGE = "u-boot-spl-${MACHINE}-${PV}-${PR}.bin" > >+UBOOT_SPI_SPL_SYMLINK = "u-boot-spl-${MACHINE}.bin" > >+UBOOT_SPI_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}.img" > >+UBOOT_SPI_SYMLINK = "u-boot-${MACHINE}.img" > >+UBOOT_SPI_GPH_IMAGE = "u-boot-spi-${MACHINE}-${PV}-${PR}.gph" > >+UBOOT_SPI_GPH_SYMLINK = "u-boot-spi-${MACHINE}.gph" > >+ > >+do_configure () { > >+ oe_runmake ${UBOOT_MACHINE} > >+} > >+ > >+do_compile () { > >+ unset LDFLAGS > >+ unset CFLAGS > >+ unset CPPFLAGS > >+ oe_runmake ${UBOOT_MAKE_TARGET} > >+} > >+ > >+do_install () { > >+ install -d ${D}/boot > >+ install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE} > >+ install ${S}/spl/${UBOOT_SPI_SPL_BINARY} > >${D}/boot/${UBOOT_SPI_SPL_IMAGE} > >+ install ${S}/${UBOOT_SPI_BINARY} ${D}/boot/${UBOOT_SPI_IMAGE} > >+ install ${S}/${UBOOT_SPI_GPH_BINARY} ${D}/boot/${UBOOT_SPI_GPH_IMAGE} > >+ ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY} > >+ ln -sf ${UBOOT_SPI_SPL_IMAGE} ${D}/boot/${UBOOT_SPI_SPL_BINARY} > >+ ln -sf ${UBOOT_SPI_IMAGE} ${D}/boot/${UBOOT_SPI_BINARY} > >+ ln -sf ${UBOOT_SPI_GPH_IMAGE} ${D}/boot/${UBOOT_SPI_GPH_BINARY} > >+} > >+ > >+do_deploy () { > >+ install -d ${DEPLOY_DIR_IMAGE} > >+ install ${S}/${UBOOT_BINARY} ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE} > >+ install ${S}/spl/${UBOOT_SPI_SPL_BINARY} > >${DEPLOY_DIR_IMAGE}/${UBOOT_SPI_SPL_IMAGE} > >+ install ${S}/${UBOOT_SPI_BINARY} ${DEPLOY_DIR_IMAGE}/${UBOOT_SPI_IMAGE} > >+ install ${S}/${UBOOT_SPI_GPH_BINARY} > >${DEPLOY_DIR_IMAGE}/${UBOOT_SPI_GPH_IMAGE} > >+ > >+ cd ${DEPLOY_DIR_IMAGE} > >+ rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK} > >+ ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK} > >+ ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY} > >+ rm -f ${UBOOT_SPI_SPL_BINARY} ${UBOOT_SPI_SPL_SYMLINK} > >+ ln -sf ${UBOOT_SPI_SPL_IMAGE} ${UBOOT_SPI_SPL_SYMLINK} > >+ ln -sf ${UBOOT_SPI_SPL_IMAGE} ${UBOOT_SPI_SPL_BINARY} > >+ rm -f ${UBOOT_SPI_BINARY} ${UBOOT_SPI_SYMLINK} > >+ ln -sf ${UBOOT_SPI_IMAGE} ${UBOOT_SPI_SYMLINK} > >+ ln -sf ${UBOOT_SPI_IMAGE} ${UBOOT_SPI_BINARY} > >+ rm -f ${UBOOT_SPI_GPH_BINARY} ${UBOOT_SPI_GPH_SYMLINK} > >+ ln -sf ${UBOOT_SPI_GPH_IMAGE} ${UBOOT_SPI_GPH_SYMLINK} > >+ ln -sf ${UBOOT_SPI_GPH_IMAGE} ${UBOOT_SPI_GPH_BINARY} > >+} > > _______________________________________________ > meta-ti mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-ti > _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
