Hi Ansar, Can you share you local.conf file and FSBL boot logs? If possible share your xsa with bitstream included we will validate here.
Thanks, Sandeep From: [email protected] <[email protected]> On Behalf Of Rasool, Ansar via lists.yoctoproject.org Sent: Tuesday, November 9, 2021 4:23 AM To: [email protected] Subject: [meta-xilinx] ZCU102 Boot fails with Xilinx yocto manifest 2021.2 Hi, I am trying to boot zcu102 rev1.1 board with petalinux-image-minimal image built from yocto manifest 2021.2 https://github.com/Xilinx/yocto-manifests/blob/rel-v2021.2/default.xml . BSP for zcu102-zynqmp builds fine but when tried to boot, it stucks at loading Xilinx FSBL only and fails to load uboot. Upon my initial investigation, it seems to be the issue caused by https://github.com/Xilinx/meta-xilinx-tools/blob/rel-v2021.2/recipes-bsp/bootbin/xilinx-bootbin_1.0.bbappend#L1 the bistream in BIF_PARTITION_ATTR variable, which is just appending bitstream to the end. However, it should be added in a defined order as mentioned here. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842019/Zynq+UltraScale+FSBL#ZynqUltraScale%2BFSBL-IsthereanyorderinwhichIhavetospecifybitstreaminBIFfile(forbootimagecreation)%3F Any help in this regard will be appreciable. Regards, Ansar Rasool
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#4941): https://lists.yoctoproject.org/g/meta-xilinx/message/4941 Mute This Topic: https://lists.yoctoproject.org/mt/86928782/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
