Hello Everybody, I was trying to build a custom Linux using Yocto Project for Zedboard. I have very limited knowledge on Embedded Linux and Yocto. I mainly followed two tutorial videos I found on Youtube. The first one using Zedboard: https://youtu.be/XPnmB-THjiY and the second one using Zybo board: https://youtu.be/FMCfn0zwhaQ. However, Unfortunately I failed. I format an SD Card. Created two partions: One is ROOT_FS ext4 type and the other one is ZED_BOOT FAT16 type. I put the rootfs.tar.gz file to the ROOT_FS and untar it. After that, I put boot.bin, core-image-minimal-zedboard-zynq7-20230714063552.rootfs.cpio.gz.u-boot, u-boot.img, uEnv.txt, uImage and Zynq-zed.dtb files. The thing is they use uImage.dtb files in both tutorials but there is no uImage.dtb file in my build. I don't know why but the outputs of my build are kinda different from those in the tutorials. I used 3.2.4 Gatesgarth version of Yocto, maybe this is the reason. When I open the uEnv.txt file, It says "devicetree_image=zynq-zed.dtb" and "kernel_image=uImage". So I put these files to the ZED_BOOT. When I insert the SD card to the Zedboard, I can't get any reaction from it. I also tried the reference sd card comes in the box and it worked. So, I don't think the problem is about connections or jumpers etc. I am suspicious about I don't have Xilinx tools Installed. Is it mandatory to install them? What might be the problem? Thank You.
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#5258): https://lists.yoctoproject.org/g/meta-xilinx/message/5258 Mute This Topic: https://lists.yoctoproject.org/mt/100619140/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
