On Mon, Nov 21, 2016 at 8:26 AM, SMITH Peter T <[email protected]> wrote: > Hi, > > > > I am trying to run Xilinx’s QEMU (as built by meta-xilinx release 2016.3) > and am receiving the following error > > > > qemu: RAM size must be less than 4GB to boot Linux kernel using ATAGS (try > passing a device tree using -dtb) > > > > on running ../sources/meta-xilinx/scripts/runqemu qemuzynqmp as instructed > here http://www.wiki.xilinx.com/QEMU+Yocto+Flow > > > > Any clues as to what is wrong?
Hello Peter, That is a strange error. I haven't seen that before with the Yocto flow. I'll see if I can reproduce it. Have you made any changes to the default/standard flow? Thanks, Alistair > > > > Here is the log > > peter@peter-VirtualBox:/yocto/peter/CSP/build$ > ../sources/meta-xilinx/scripts/runqemu qemuzynqmp > > > > Continuing with the following parameters: > > KERNEL: > [/yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/Image--4.6-xilinx+git0+0e4e407149-r0-csprtguest-zynqmp-20161121130524.bin] > > ROOTFS: > [/yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/petalinux-minimal-csprtguest-zynqmp-20161121130524.rootfs.ext3] > > FSTYPE: [ext3] > > Setting up tap interface under sudo > > Acquiring lockfile for tap0... > > -net nic -net nic -net nic -net nic -net > user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.0.2.2 -M arm-generic-fdt > -serial mon:stdio -device > loader,file=/yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/arm-trusted-firmware-aarch64.elf,cpu=0 > -hw-dtb > /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/qemu-hw-devicetrees/zcu102-arm-single.dtb > -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -nographic -tftp > /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp -m 2048 > > Running qemu-system-aarch64... > > /yocto/peter/CSP/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-xilinx/qemu-system-aarch64 > -kernel > /yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/Image--4.6-xilinx+git0+0e4e407149-r0-csprtguest-zynqmp-20161121130524.bin > -net nic -net nic -net nic -net nic -net > user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.0.2.2 -M arm-generic-fdt > -serial mon:stdio -device > loader,file=/yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/arm-trusted-firmware-aarch64.elf,cpu=0 > -hw-dtb > /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/qemu-hw-devicetrees/zcu102-arm-single.dtb > -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -nographic -tftp > /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp -no-reboot -m 2048 > -serial null -append "mem= rootfstype=ext3 " > > -------------------------------------------------------------------- > > Xilinx QEMU Nov 21 2016 16:09:08. > > -------------------------------------------------------------------- > > qemu: RAM size must be less than 4GB to boot Linux kernel using ATAGS (try > passing a device tree using -dtb) > > Set 'tap0' nonpersistent > > Releasing lockfile of preconfigured tap device 'tap0' > > > > > > Peter Smith > > Principal Engineer, Chief Engineering, Grid Solutions > > > > T +44 1785 786406 > > > > > ________________________________ > CONFIDENTIALITY : This e-mail and any attachments are confidential and may > be privileged. If you are not a named recipient, please notify the sender > immediately and do not disclose the contents to another person, use it for > any purpose or store or copy the information in any medium. > > -- > _______________________________________________ > meta-xilinx mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-xilinx > -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
