On Mon, Nov 28, 2016 at 11:49 PM, SMITH Peter T <[email protected]> wrote: > Alistair, no I did not make any changes, but I did work out what was wrong, > but for the life of me I can't remember what it was other than something > along the lines of finger trouble, suffice to say, I have it fully > operational now. Thanks anyway. Peter
Strange... Oh well, I'm glad it is working now. Let me know if you see any other issues. Thanks, Alistair > > -----Original Message----- > From: Alistair Francis [mailto:[email protected]] > Sent: 29 November 2016 00:04 > To: SMITH Peter T <[email protected]> > Cc: [email protected] > Subject: Re: [meta-xilinx] Problem with Xilinx QEMU & Yocto Flow > > On Mon, Nov 21, 2016 at 8:26 AM, SMITH Peter T <[email protected]> > wrote: >> Hi, >> >> >> >> I am trying to run Xilinx’s QEMU (as built by meta-xilinx release >> 2016.3) and am receiving the following error >> >> >> >> qemu: RAM size must be less than 4GB to boot Linux kernel using ATAGS >> (try passing a device tree using -dtb) >> >> >> >> on running ../sources/meta-xilinx/scripts/runqemu qemuzynqmp as >> instructed here >> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.wiki.xilinx.co >> m_QEMU-2BYocto-2BFlow&d=DQIFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLr >> DQYWSI&r=-0xOp6WEUxZEZ28IafXrMa3oLhGTFvyj7y8nzyNrgGo&m=VfKpTfuXMG0O8Rf >> jz114ygfljveAfqKkU0wdQi_OaTo&s=E-4XI4mlmcfTrqoALJLCLcGaZpX_5vtt2NPeVUw >> Na9s&e= >> >> >> >> Any clues as to what is wrong? > > Hello Peter, > > That is a strange error. I haven't seen that before with the Yocto flow. > > I'll see if I can reproduce it. Have you made any changes to the > default/standard flow? > > Thanks, > > Alistair > >> >> >> >> Here is the log >> >> peter@peter-VirtualBox:/yocto/peter/CSP/build$ >> ../sources/meta-xilinx/scripts/runqemu qemuzynqmp >> >> >> >> Continuing with the following parameters: >> >> KERNEL: >> [/yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/Image--4.6 >> -xilinx+git0+0e4e407149-r0-csprtguest-zynqmp-20161121130524.bin] >> >> ROOTFS: >> [/yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/petalinux- >> minimal-csprtguest-zynqmp-20161121130524.rootfs.ext3] >> >> FSTYPE: [ext3] >> >> Setting up tap interface under sudo >> >> Acquiring lockfile for tap0... >> >> -net nic -net nic -net nic -net nic -net >> user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.0.2.2 -M >> arm-generic-fdt -serial mon:stdio -device >> loader,file=/yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/arm-tr >> usted-firmware-aarch64.elf,cpu=0 >> -hw-dtb >> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/qemu-hw-devicetree >> s/zcu102-arm-single.dtb -device >> loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -nographic -tftp >> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp -m 2048 >> >> Running qemu-system-aarch64... >> >> /yocto/peter/CSP/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-xilinx/q >> emu-system-aarch64 >> -kernel >> /yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/Image--4.6- >> xilinx+git0+0e4e407149-r0-csprtguest-zynqmp-20161121130524.bin >> -net nic -net nic -net nic -net nic -net >> user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.0.2.2 -M >> arm-generic-fdt -serial mon:stdio -device >> loader,file=/yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/arm-tr >> usted-firmware-aarch64.elf,cpu=0 >> -hw-dtb >> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/qemu-hw-devicetree >> s/zcu102-arm-single.dtb -device >> loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -nographic -tftp >> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp -no-reboot -m 2048 >> -serial null -append "mem= rootfstype=ext3 " >> >> -------------------------------------------------------------------- >> >> Xilinx QEMU Nov 21 2016 16:09:08. >> >> -------------------------------------------------------------------- >> >> qemu: RAM size must be less than 4GB to boot Linux kernel using ATAGS >> (try passing a device tree using -dtb) >> >> Set 'tap0' nonpersistent >> >> Releasing lockfile of preconfigured tap device 'tap0' >> >> >> >> >> >> Peter Smith >> >> Principal Engineer, Chief Engineering, Grid Solutions >> >> >> >> T +44 1785 786406 >> >> >> >> >> ________________________________ >> CONFIDENTIALITY : This e-mail and any attachments are confidential and >> may be privileged. If you are not a named recipient, please notify the >> sender immediately and do not disclose the contents to another person, >> use it for any purpose or store or copy the information in any medium. >> >> -- >> _______________________________________________ >> meta-xilinx mailing list >> [email protected] >> https://lists.yoctoproject.org/listinfo/meta-xilinx >> > > ________________________________ > CONFIDENTIALITY : This e-mail and any attachments are confidential and may be > privileged. If you are not a named recipient, please notify the sender > immediately and do not disclose the contents to another person, use it for > any purpose or store or copy the information in any medium. -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
