Hi, I'm trying to test my ZCU102 minimal image on QEMU emulator (I'm using Morty branch).
I have got to compile the image, but when I execute 'runqemu zcu102-zynqmp' command, everything looks to go OK until the execution arrives to this point and get stack. pello@pello-VirtualBox:/opt/yocto/poky/2.2/new_zcu102/build$ runqemu zcu102-zynqmp runqemu - INFO - Assuming MACHINE = zcu102-zynqmp runqemu - INFO - Running MACHINE=zcu102-zynqmp bitbake -e... runqemu - INFO - MACHINE: zcu102-zynqmp runqemu - INFO - DEPLOY_DIR_IMAGE: /opt/yocto/poky/2.2/new_zcu102 /build/tmp/deploy/images/zcu102-zynqmp runqemu - INFO - Running ls -t /opt/yocto/poky/2.2/new_zcu102 /build/tmp/deploy/images/zcu102-zynqmp/*.qemuboot.conf... runqemu - INFO - CONFFILE: /opt/yocto/poky/2.2/new_zcu102 /build/tmp/deploy/images/zcu102-zynqmp/core-image- minimal-zcu102-zynqmp-20170203125134.qemuboot.conf runqemu - INFO - Continuing with the following parameters: KERNEL: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/ zcu102-zynqmp/Image] DTB: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/ zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb] MACHINE: [zcu102-zynqmp] FSTYPE: [cpio] ROOTFS: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/ zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.rootfs.cpio] CONFFILE: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/ zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.qemuboot.conf] runqemu - INFO - Running /sbin/ip link... runqemu - INFO - Setting up tap interface under sudo [sudo] password for pello: Lo sentimos, vuelva a intentarlo. [sudo] password for pello: runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock... runqemu - INFO - Created tap: tap0 runqemu - INFO - Running ldd /opt/yocto/poky/2.2/new_zcu102 /build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64... runqemu - INFO - Running /opt/yocto/poky/2.2/new_zcu102 /build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -net nic -net nic -net nic -net nic,netdev=net0,macaddr=52:54:00:12:34:02 -machine xlnx-zcu102 -m 2048 -initrd /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/ zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.rootfs.cpio -nographic -serial mon:stdio -serial null -kernel /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/Image -append 'root=/dev/ram0 rw debugshell mem=2048M ip=192.168.7.2::192.168.7.1 :255.255.255.0 console=ttyPS0,115200 earlyprintk' -dtb /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/ zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb Warning: vlan 0 is not connected to host network As you can see, the program get stack in this line and I don´t know why. I would be very pleased if you answer to me as soon as possible. Looking forward to your answer, Best regards, Pello
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
