On Tue, Feb 7, 2017 at 9:00 AM, Alistair Francis <[email protected]> wrote: > On Tue, Feb 7, 2017 at 2:31 AM, Pello Heriz > <[email protected]> wrote: >> Hi, >> >> I'm trying to test my ZCU102 minimal image on QEMU emulator (I'm using Morty >> branch). >> >> I have got to compile the image, but when I execute 'runqemu zcu102-zynqmp' >> command, everything looks to go OK until the execution arrives to this point >> and get stack. >> >> pello@pello-VirtualBox:/opt/yocto/poky/2.2/new_zcu102/build$ runqemu >> zcu102-zynqmp >> runqemu - INFO - Assuming MACHINE = zcu102-zynqmp >> runqemu - INFO - Running MACHINE=zcu102-zynqmp bitbake -e... >> runqemu - INFO - MACHINE: zcu102-zynqmp >> runqemu - INFO - DEPLOY_DIR_IMAGE: >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp >> runqemu - INFO - Running ls -t >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/*.qemuboot.conf... >> runqemu - INFO - CONFFILE: >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.qemuboot.conf >> runqemu - INFO - Continuing with the following parameters: >> >> KERNEL: >> [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/Image] >> DTB: >> [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb] >> MACHINE: [zcu102-zynqmp] >> FSTYPE: [cpio] >> ROOTFS: >> [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.rootfs.cpio] >> CONFFILE: >> [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.qemuboot.conf] >> >> runqemu - INFO - Running /sbin/ip link... >> runqemu - INFO - Setting up tap interface under sudo >> [sudo] password for pello: >> Lo sentimos, vuelva a intentarlo. >> [sudo] password for pello: >> runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock... >> runqemu - INFO - Created tap: tap0 >> runqemu - INFO - Running ldd >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64... >> runqemu - INFO - Running >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64 >> -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -net nic -net nic >> -net nic -net nic,netdev=net0,macaddr=52:54:00:12:34:02 -machine >> xlnx-zcu102 -m 2048 -initrd >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.rootfs.cpio >> -nographic -serial mon:stdio -serial null -kernel >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/Image >> -append 'root=/dev/ram0 rw debugshell mem=2048M >> ip=192.168.7.2::192.168.7.1:255.255.255.0 console=ttyPS0,115200 earlyprintk' >> -dtb >> /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb >> Warning: vlan 0 is not connected to host network >> >> As you can see, the program get stack in this line and I don´t know why. > > Hello Pello, > > Nothing is stuck QEMU is running and trying to boot your images. > Unfortunately we don't have all of the support in mainline QEMU to > boot the Xilinx kernel for the ZCU102 and the kernel is panicking. > > You will need to use the Xilinx fork of QEMU. You can do this by > setting 'XILINX_QEMU = "1'"' in your locall.conf (you will need to > delete your tmp and rebuild after that).
Woops! My mistake, use this in your local.conf: XILINX_QEMUBOOT = "1" Make sure you delete tmp and rebuild. Thanks, Alistair > > Then you should be able to boot your images on QEMU. > > Thanks, > > Alistair > >> >> I would be very pleased if you answer to me as soon as possible. >> Looking forward to your answer, >> Best regards, >> Pello >> >> -- >> _______________________________________________ >> meta-xilinx mailing list >> [email protected] >> https://lists.yoctoproject.org/listinfo/meta-xilinx >> -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
