On Fri, Mar 18, 2016 at 4:57 PM, Oleg K Dzhimiev <[email protected]> wrote: > Hello, > > We've recently built U-Boot SPL with the NAND flash driver (zynq_nand.c). > The work is related to our board (10393). Might be interesting to those who > deal with the boards that have NAND flash: > http://blog.elphel.com/2016/03/nand-flash-support-for-xilinx-zynq-in-u-boot-spl/ >
This is an interesting article. I know this is an old thread but I stumbled onto it today and had a few questions. Within my krogoth/yocto build I get several files and it is confusing which to use. I have a boot.bin (fsbl/bit/u-boot.elf) I generate/program in SDK and that works fine. If I'd like to program NAND from within u-boot via say booting from an SD card, do you have a recommendation for which files to use? I've patched u-boot with my ps7 files and have CONFIG_SPL=y. Should I use SPL or is there a way to program my existing boot.bin directly? thanks -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
