The reason I ask is that when I try to program the QSPI flash with this
BOOT.bin
//arch = zynqmp; split = false; format = BIN
the_ROM_image:
{
[fsbl_config]a53_x64
[bootloader]E:\gFEX_pre_production\image\zu19eg_3\zu19eg_3.sdk\fsbl_a53\Debug\fsbl_a53.elf
[destination_cpu =
pmu]E:\gFEX_pre_production\image\giordon\linux\gfex-prototype3\pmu-gfex-prototype3.elf
[destination_device =
pl]E:\gFEX_pre_production\image\zu19eg_3\zu19eg_3.sdk\zcu19eg_top_hw_platform_0\zcu19eg_top.bit
[destination_cpu = a53-0, exception_level = el-3,
trustzone]E:\gFEX_pre_production\image\giordon\linux\gfex-prototype3\arm-trusted-firmware.elf
[destination_cpu = a53-0, exception_level =
el-2]E:\gFEX_pre_production\image\giordon\linux\gfex-prototype3\u-boot.elf
}
the u-boot line hangs with "MMC: " and nothing else. I think this is
related to the SD not working at all.
On Fri, Nov 17, 2017 at 2:04 PM Giordon Stark <[email protected]> wrote:
> Is it possible to tell u-boot to not boot from MMC? I suspect it's a
> configuration flag -- and this is when I try to program the QSPI using my
> boot.bin and it would be beneficial to make that work.
>
> Thanks,
>
> Giordon
>
--
_______________________________________________
meta-xilinx mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-xilinx
