> -----Original Message----- > From: Luca Ceresoli [mailto:[email protected]] > Sent: Wednesday, May 30, 2018 2:33 AM > To: Manjukumar Harthikote Matha <[email protected]>; meta- > [email protected] > Cc: Devarsh Thakkar <[email protected]>; Devarsh Thakkar > <[email protected]> > Subject: Re: [meta-xilinx] [meta-xilinx-bsp][PATCH v2] zcu106-zynqmp.conf: Add > support for ZCU106 Evaluation Kit > > Hi Manjukumar, Devarsh, > > On 29/05/2018 04:04, Manjukumar Matha wrote: > > From: Devarsh Thakkar <[email protected]> > > > > The ZCU106 Evaluation Kit enables designers to jumpstart designs for > > video conferencing, surveillance, Advanced Driver Assisted Systems > > (ADAS) and streaming and encoding applications. This kit features a > > Zynq® UltraScale+™ MPSoC EV device and supports all major peripherals > > and interfaces, enabling development for a wide range of applications. > > The included ZU7EV device is equipped with a quad-core ARM® Cortex™-A53 > > applications processor, dual-core Cortex-R5 real-time processor, > > Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video > > codec, and 16nm FinFET+ programmable logic. > > > > This patch adds machine configuration file for ZCU106 Evaluation Kit > > with required setting of board specific yocto variables needed for > > compilation of bootloader, kernel and device-tree. > > > > - linux-xlnx is the kernel provider > > - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin > > - hwcodec is provided by libomxil-xlnx recipe, this will pull in > > additional dependencies of VCU kernel modules, control software, > > firmware binaries > > > > Depending on the application need you may want to pass the appropriate > > CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel. > > > > While using SPL flow, you may need to provide additional hack to pass > > the PMU config object. This is similar to all ZU+ boards, due to gap in > > SPL flow unable to load PMU config object. > > Thanks for the added comments. > > > Signed-off-by: Devarsh Thakkar <[email protected]> > > Tested-by: Maulik Desai <[email protected]> > > Signed-off-by: Manjukumar Matha <manjukumar.harthikote- > [email protected]> > > --- > > Changelog: > > v2: Add commit message to describe the providers and state of SPL boot. > > Also add the requirement of CMA size required based on appliction > > > > meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf | 33 > ++++++++++++++++++++++ > > .../recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb | 1 + > > 2 files changed, 34 insertions(+) > > create mode 100644 meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf > > > > diff --git a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf b/meta-xilinx- > bsp/conf/machine/zcu106-zynqmp.conf > > new file mode 100644 > > index 0000000..42ac479 > > --- /dev/null > > +++ b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf > > @@ -0,0 +1,33 @@ > > +#@TYPE: Machine > > +#@NAME: zcu106-zynqmp > > +#@DESCRIPTION: Machine support for ZCU106 Evaluation Board. > > + > > +require conf/machine/include/tune-zynqmp.inc > > +require conf/machine/include/machine-xilinx-default.inc > > +require conf/machine/include/machine-xilinx-board.inc > > +include conf/machine/include/zynqmp-pmu-config.inc > > + > > +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" > > + > > +UBOOT_MACHINE = "xilinx_zynqmp_zcu106_revA_defconfig" > > +SPL_BINARY = "spl/boot.bin" > > + > > +SERIAL_CONSOLE = "115200 ttyPS0" > > SERIAL_CONSOLE is deprecated, I think this should become SERIAL_CONSOLES. >
I will merge this as is and send out another patch for all machines to use SERIAL_CONSOLES Thanks, Manju -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
