Hi Manjukumar, On 31/05/2018 02:52, Manjukumar Harthikote Matha wrote: > > >> -----Original Message----- >> From: Luca Ceresoli [mailto:[email protected]] >> Sent: Wednesday, May 30, 2018 2:33 AM >> To: Manjukumar Harthikote Matha <[email protected]>; meta- >> [email protected] >> Cc: Devarsh Thakkar <[email protected]>; Devarsh Thakkar >> <[email protected]> >> Subject: Re: [meta-xilinx] [meta-xilinx-bsp][PATCH v2] zcu106-zynqmp.conf: >> Add >> support for ZCU106 Evaluation Kit >> >> Hi Manjukumar, Devarsh, >> >> On 29/05/2018 04:04, Manjukumar Matha wrote: >>> From: Devarsh Thakkar <[email protected]> >>> >>> The ZCU106 Evaluation Kit enables designers to jumpstart designs for >>> video conferencing, surveillance, Advanced Driver Assisted Systems >>> (ADAS) and streaming and encoding applications. This kit features a >>> Zynq® UltraScale+™ MPSoC EV device and supports all major peripherals >>> and interfaces, enabling development for a wide range of applications. >>> The included ZU7EV device is equipped with a quad-core ARM® Cortex™-A53 >>> applications processor, dual-core Cortex-R5 real-time processor, >>> Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video >>> codec, and 16nm FinFET+ programmable logic. >>> >>> This patch adds machine configuration file for ZCU106 Evaluation Kit >>> with required setting of board specific yocto variables needed for >>> compilation of bootloader, kernel and device-tree. >>> >>> - linux-xlnx is the kernel provider >>> - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin >>> - hwcodec is provided by libomxil-xlnx recipe, this will pull in >>> additional dependencies of VCU kernel modules, control software, >>> firmware binaries >>> >>> Depending on the application need you may want to pass the appropriate >>> CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel. >>> >>> While using SPL flow, you may need to provide additional hack to pass >>> the PMU config object. This is similar to all ZU+ boards, due to gap in >>> SPL flow unable to load PMU config object. >> >> Thanks for the added comments. >> >>> Signed-off-by: Devarsh Thakkar <[email protected]> >>> Tested-by: Maulik Desai <[email protected]> >>> Signed-off-by: Manjukumar Matha <manjukumar.harthikote- >> [email protected]> >>> --- >>> Changelog: >>> v2: Add commit message to describe the providers and state of SPL boot. >>> Also add the requirement of CMA size required based on appliction >>> >>> meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf | 33 >> ++++++++++++++++++++++ >>> .../recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb | 1 + >>> 2 files changed, 34 insertions(+) >>> create mode 100644 meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf >>> >>> diff --git a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf b/meta-xilinx- >> bsp/conf/machine/zcu106-zynqmp.conf >>> new file mode 100644 >>> index 0000000..42ac479 >>> --- /dev/null >>> +++ b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf >>> @@ -0,0 +1,33 @@ >>> +#@TYPE: Machine >>> +#@NAME: zcu106-zynqmp >>> +#@DESCRIPTION: Machine support for ZCU106 Evaluation Board. >>> + >>> +require conf/machine/include/tune-zynqmp.inc >>> +require conf/machine/include/machine-xilinx-default.inc >>> +require conf/machine/include/machine-xilinx-board.inc >>> +include conf/machine/include/zynqmp-pmu-config.inc >>> + >>> +MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" >>> + >>> +UBOOT_MACHINE = "xilinx_zynqmp_zcu106_revA_defconfig" >>> +SPL_BINARY = "spl/boot.bin" >>> + >>> +SERIAL_CONSOLE = "115200 ttyPS0" >> >> SERIAL_CONSOLE is deprecated, I think this should become SERIAL_CONSOLES. >> > > I will merge this as is and send out another patch for all machines to use > SERIAL_CONSOLES
That's fine, thanks. -- Luca -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
