Hi Manjukumar, On 11/12/18 17:07, Manjukumar Harthikote Matha wrote: > Hi Luca, > >> -----Original Message----- >> From: [email protected] [mailto:meta-xilinx- >> [email protected]] On Behalf Of Luca Ceresoli >> Sent: Tuesday, December 11, 2018 7:45 AM >> To: Alejandro Enedino Hernandez Samaniego <[email protected]>; meta- >> [email protected] >> Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port pmu-firmware recipe >> >> Hi Alejandro, >> >> On 06/12/18 22:56, Alejandro Enedino Hernandez Samaniego wrote: >>> This patch ports the pmu-firmware recipe from meta-xilinx-bsp to be >>> used with the standalone/baremetal toolchain and also upgrades it to >>> the latest release at this point. >>> >>> The recipe was trimmed down, and a few changes had to be made to make >>> it compatible with the baremetal layer, DEPENDS, pass include dir, >>> license and such. >>> >>> Signed-off-by: Alejandro Enedino Hernandez Samaniego >>> <[email protected]> >>> Signed-off-by: Manjukumar Matha >>> <[email protected]> >> >> I tried to test your entire patch series but with bad luck. Well, indeed I >> tested the >> patches from the github meta-xilinx repo up to [0], not sure whether the >> repo is >> more up to date than the patches here. >> >> The first issue is that xilinx-standalone is compatible with thud, but on >> the mentioned >> commit (as well as on master) the mete-xilinx-bsp layer is compatible with >> sumo >> only. I solved by cherry-picking [1]. >> >> Then I followed the instructions in README.md and 'bitbake newlib' ran >> successfully. >> But 'bitbake pmu-firmware' gives: >> >> microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift >> -mxl-pattern-compare - >> mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul -mxl-soft-div -- >> sysroot=/home/ceresoli/temp/prova-thud- >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot >> -o executable.elf pm_master.o pm_api.o xpfw_error_manager.o xpfw_restart.o >> pm_config.o xpfw_mod_legacy.o pm_requirement.o pm_node_reset.o pm_core.o >> pm_system.o pm_common.o xpfw_xpu.o pm_gic_proxy.o xpfw_aib.o >> xpfw_events.o pm_binding.o pm_mmio_access.o xpfw_scheduler.o pm_slave.o >> xpfw_mod_pm.o pm_ddr.o pm_qspi.o pm_sram.o xpfw_mod_sched.o >> xpfw_mod_rtc.o pm_usb.o pm_extern.o xpfw_user_startup.o >> xpfw_rom_interface.o xpfw_mod_wdt.o pm_proc.o pm_reset.o pm_callbacks.o >> xpfw_mod_stl.o idle_hooks.o xpfw_crc.o xpfw_ipi_manager.o >> xpfw_interrupts.o >> xpfw_mod_dap.o xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o >> xpfw_module.o pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o pm_gpp.o >> pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o pm_notifier.o xpfw_start.o >> - >> MMD -MP -Wl,--build-id=none -I/home/ceresoli/temp/prova-thud- >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot/usr/include >> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group >> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxil,-lgcc,-lc,--end-group >> -nostartfiles -Wl,--gc-sections -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib >> -Tlscript.ld >> lto1: fatal error: multiple prevailing defs for 'XUsbPsu_DisableIntr' >> compilation terminated. >> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit status >> compilation terminated. >> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazeel-v9.2-bs- >> cmp-xilinx-elf/pmu-firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot- >> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xilinx- >> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: >> error: lto-wrapper failed >> collect2: error: ld returned 1 exit status >> Makefile:28: recipe for target 'executable.elf' failed >> make: *** [executable.elf] Error 1 >> >> I then tried with current master-next [2] and got: >> >> microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift >> -mxl-pattern-compare - >> mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul -mxl-soft-div -- >> sysroot=/home/ceresoli/temp/prova-thud- >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot >> -o executable.elf pm_master.o xpfw_error_manager.o xpfw_restart.o >> pm_notifier.o xpfw_mod_legacy.o pm_requirement.o pm_node_reset.o >> pm_core.o pm_system.o pm_config.o xpfw_xpu.o pm_gic_proxy.o xpfw_aib.o >> xpfw_events.o pm_binding.o pm_mmio_access.o xpfw_scheduler.o pm_slave.o >> pm_pinctrl.o xpfw_mod_pm.o pm_ddr.o pm_qspi.o pm_sram.o >> xpfw_mod_sched.o xpfw_mod_rtc.o pm_usb.o pm_extern.o xpfw_user_startup.o >> xpfw_rom_interface.o xpfw_mod_wdt.o pm_proc.o pm_reset.o pm_callbacks.o >> xpfw_mod_stl.o idle_hooks.o xpfw_crc.o xpfw_ipi_manager.o >> xpfw_interrupts.o >> xpfw_mod_dap.o xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o >> xpfw_module.o pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o pm_gpp.o >> pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o xpfw_start.o -MMD -MP - >> Wl,--build-id=none -I/home/ceresoli/temp/prova-thud- >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- >> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot/usr/include >> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group >> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxilskey,-lxil,-lgcc,-lc,--end-group >> -nostartfiles -Wl,--gc-sections -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib >> -Tlscript.ld >> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazeel-v9.2-bs- >> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot- >> native/usr/bin/microblazeel-xilinx-elf/../../lib/microblazeel-xilinx- >> elf/gcc/../../../libexec/microblazeel-xilinx-elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: >> cannot open linker script file xilinx.ld: No such file or directory >> collect2: error: ld returned 1 exit status >> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit status >> compilation terminated. >> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazeel-v9.2-bs- >> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot- >> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xilinx- >> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: >> error: lto-wrapper failed >> collect2: error: ld returned 1 exit status >> Makefile:28: recipe for target 'executable.elf' failed >> >> Am I doing something wrong? > > I tried replicating the issue but I am unable to do so. > Do you have pmu-firmware in a different tmp work directory? > > I have the following in my local.conf > MACHINE="zynqmp-pmu" > DISTRO="xilinx-standalone" > GCCVERSION="7.%" > TMPDIR="${TOPDIR}/pmutmp" > > And run as bitbake pmu-firmware
I'm not trying the multiconfig setup yet. I'm trying to set up the standalone layer as per its README.md and get a pmufw binary out of that. -- Luca -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
