Hi Luca, > -----Original Message----- > From: Luca Ceresoli [mailto:[email protected]] > Sent: Tuesday, December 11, 2018 8:15 AM > To: Manjukumar Harthikote Matha <[email protected]>; Alejandro Enedino > Hernandez Samaniego <[email protected]>; [email protected] > Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port pmu-firmware recipe > > Hi Manjukumar, > > On 11/12/18 17:07, Manjukumar Harthikote Matha wrote: > > Hi Luca, > > > >> -----Original Message----- > >> From: [email protected] [mailto:meta-xilinx- > >> [email protected]] On Behalf Of Luca Ceresoli > >> Sent: Tuesday, December 11, 2018 7:45 AM > >> To: Alejandro Enedino Hernandez Samaniego <[email protected]>; > >> meta- [email protected] > >> Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port > >> pmu-firmware recipe > >> > >> Hi Alejandro, > >> > >> On 06/12/18 22:56, Alejandro Enedino Hernandez Samaniego wrote: > >>> This patch ports the pmu-firmware recipe from meta-xilinx-bsp to be > >>> used with the standalone/baremetal toolchain and also upgrades it to > >>> the latest release at this point. > >>> > >>> The recipe was trimmed down, and a few changes had to be made to > >>> make it compatible with the baremetal layer, DEPENDS, pass include > >>> dir, license and such. > >>> > >>> Signed-off-by: Alejandro Enedino Hernandez Samaniego > >>> <[email protected]> > >>> Signed-off-by: Manjukumar Matha > >>> <[email protected]> > >> > >> I tried to test your entire patch series but with bad luck. Well, > >> indeed I tested the patches from the github meta-xilinx repo up to > >> [0], not sure whether the repo is more up to date than the patches here. > >> > >> The first issue is that xilinx-standalone is compatible with thud, > >> but on the mentioned commit (as well as on master) the > >> mete-xilinx-bsp layer is compatible with sumo only. I solved by > >> cherry-picking [1]. > >> > >> Then I followed the instructions in README.md and 'bitbake newlib' ran > successfully. > >> But 'bitbake pmu-firmware' gives: > >> > >> microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift > >> -mxl-pattern-compare - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul > >> -mxl-soft-div -- > >> sysroot=/home/ceresoli/temp/prova-thud- > >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- > >> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot > >> -o executable.elf pm_master.o pm_api.o xpfw_error_manager.o > >> xpfw_restart.o pm_config.o xpfw_mod_legacy.o pm_requirement.o > >> pm_node_reset.o pm_core.o pm_system.o pm_common.o xpfw_xpu.o > >> pm_gic_proxy.o xpfw_aib.o xpfw_events.o pm_binding.o > >> pm_mmio_access.o xpfw_scheduler.o pm_slave.o xpfw_mod_pm.o > >> pm_ddr.o pm_qspi.o pm_sram.o xpfw_mod_sched.o xpfw_mod_rtc.o > >> pm_usb.o pm_extern.o xpfw_user_startup.o xpfw_rom_interface.o > >> xpfw_mod_wdt.o pm_proc.o pm_reset.o pm_callbacks.o xpfw_mod_stl.o > >> idle_hooks.o xpfw_crc.o xpfw_ipi_manager.o xpfw_interrupts.o > >> xpfw_mod_dap.o xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o > >> xpfw_module.o pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o > >> pm_gpp.o pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o > >> pm_notifier.o xpfw_start.o - MMD -MP -Wl,--build-id=none > >> -I/home/ceresoli/temp/prova-thud- > >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- > >> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot/usr/include > >> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group > >> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxil,-lgcc,-lc,--end-group > >> -nostartfiles -Wl,--gc-sections > >> -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib > >> -Tlscript.ld > >> lto1: fatal error: multiple prevailing defs for 'XUsbPsu_DisableIntr' > >> compilation terminated. > >> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit > >> status compilation terminated. > >> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee > >> l-v9.2-bs- > >> cmp-xilinx-elf/pmu-firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-s > >> ysroot- > >> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil > >> inx- > >> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: > >> error: lto-wrapper failed > >> collect2: error: ld returned 1 exit status > >> Makefile:28: recipe for target 'executable.elf' failed > >> make: *** [executable.elf] Error 1 > >> > >> I then tried with current master-next [2] and got: > >> > >> microblazeel-xilinx-elf-gcc -mlittle-endian -mxl-barrel-shift > >> -mxl-pattern-compare - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul > >> -mxl-soft-div -- > >> sysroot=/home/ceresoli/temp/prova-thud- > >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- > >> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot > >> -o executable.elf pm_master.o xpfw_error_manager.o xpfw_restart.o > >> pm_notifier.o xpfw_mod_legacy.o pm_requirement.o pm_node_reset.o > >> pm_core.o pm_system.o pm_config.o xpfw_xpu.o pm_gic_proxy.o > >> xpfw_aib.o xpfw_events.o pm_binding.o pm_mmio_access.o > >> xpfw_scheduler.o pm_slave.o pm_pinctrl.o xpfw_mod_pm.o pm_ddr.o > >> pm_qspi.o pm_sram.o xpfw_mod_sched.o xpfw_mod_rtc.o pm_usb.o > >> pm_extern.o xpfw_user_startup.o xpfw_rom_interface.o xpfw_mod_wdt.o > >> pm_proc.o pm_reset.o pm_callbacks.o xpfw_mod_stl.o idle_hooks.o > >> xpfw_crc.o xpfw_ipi_manager.o xpfw_interrupts.o xpfw_mod_dap.o > >> xpfw_platform.o pm_node.o xpfw_core.o xpfw_resets.o xpfw_module.o > >> pm_periph.o xpfw_util.o xpfw_main.o pm_hooks.o pm_gpp.o > >> pm_power.o xpfw_mod_em.o pm_pll.o pm_clock.o xpfw_start.o -MMD > >> -MP - Wl,--build-id=none -I/home/ceresoli/temp/prova-thud- > >> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu- > >> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot/usr/include > >> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group > >> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxilskey,-lxil,-lgcc,-lc,--e > >> nd-group -nostartfiles -Wl,--gc-sections > >> -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib > >> -Tlscript.ld > >> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee > >> l-v9.2-bs- > >> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s > >> ysroot- > >> native/usr/bin/microblazeel-xilinx-elf/../../lib/microblazeel-xilinx- > >> elf/gcc/../../../libexec/microblazeel-xilinx-elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: > >> cannot open linker script file xilinx.ld: No such file or directory > >> collect2: error: ld returned 1 exit status > >> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit > >> status compilation terminated. > >> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee > >> l-v9.2-bs- > >> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s > >> ysroot- > >> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil > >> inx- > >> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld: > >> error: lto-wrapper failed > >> collect2: error: ld returned 1 exit status > >> Makefile:28: recipe for target 'executable.elf' failed > >> > >> Am I doing something wrong? > > > > I tried replicating the issue but I am unable to do so. > > Do you have pmu-firmware in a different tmp work directory? > > > > I have the following in my local.conf > > MACHINE="zynqmp-pmu" > > DISTRO="xilinx-standalone" > > GCCVERSION="7.%" > > TMPDIR="${TOPDIR}/pmutmp" > > > > And run as bitbake pmu-firmware > > I'm not trying the multiconfig setup yet. I'm trying to set up the standalone > layer as > per its README.md and get a pmufw binary out of that. >
This is not multiconfig, just regular build. Maybe GCCVERSION="7.%" is missing in your setup, we should add it to MACHINE and README as well Thanks, Manju -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
