Hi Manjukumar, On 29/11/18 18:07, Manjukumar Harthikote Matha wrote: > Hi All, > > Thud release branch is under-testing as of now, we will start sending patches > next week and start merging to master: > Please check the tree here: > https://github.com/Xilinx/meta-xilinx/commits/master-next > > Major changes: > meta-xilinx-standalone layer to support building toolchain for MB and > pmu-firmware > Proposal was sent here: > https://lists.yoctoproject.org/pipermail/meta-xilinx/2018-September/004051.html > > There are two ways to build pmu-firmware: One using multiconfig and other as > two separate distros > > 1) multiconfig way: > - You need to add the dependency in the image file, for example in > core-image-minimal you will need > do_image[mcdepends] = "multiconfig:zcu102:pmu:pmu-firmware:do_deploy" > > > - Add conf/multiconfig in the build directory and create pmu.conf and > zcu102.conf under conf/multiconfig > pmu.conf consists of > MACHINE="zynqmp-pmu" > DISTRO="xilinx-standalone" > GCCVERSION="7.%" > TMPDIR="${TOPDIR}/pmutmp" > > zcu102.conf consists of > MACHINE="zcu102-zynqmp" > DISTRO="poky" > - In local.conf multiconfig is enabled by: BBMULTICONFIG ?= > "zcu102 pmu" > - bitbake multiconfig:zcu102:core-image-minimal > > This will build pmu-firmware in build/pmutmp and all the linux images in > build/tmp
[Disclaimer: I did not double-check everything I state below since it
takes hours for each test]
I tried this setup and building u-boot-xlnx fails:
$ bitbake multiconfig:zcu102:core-image-minimal
[...]
Cannot read
../../../../../../pmutmp/deploy/images/zynqmp-pmu/pmu-firmware-zynqmp-pmu.bin
This can be reproduced with the attached script.
However the above command succeeds if 'bitbake -c deploy
multiconfig:pmu:pmu-firmware' is run before that.
I fixed this issue by adding the following line to
meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb:
do_compile[mcdepends] = \
"multiconfig:zcu102:pmu:pmu-firmware:do_deploy"
Now 'bitbake multiconfig:zcu102:u-boot-xlnx' succeeds without manually
building pmu-firmware before it.
Then retrying 'bitbake multiconfig:zcu102:core-image-minimal' I get
immediately:
-----------------------8<-----------------------
ERROR: An uncaught exception occurred in runqueue
Traceback (most recent call last):
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 1479, in RunQueue.execute_runqueue():
try:
> return self._execute_runqueue()
except bb.runqueue.TaskFailure:
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 1399, in RunQueue._execute_runqueue():
[43,
967, 4, 3, 1, 5, 3, 7, 13, 1, 2, 1, 1, 246, 35, 1, 38, 1, 35, 2, 338,
204, 142, 3, 3, 37, 244])
> if self.rqdata.prepare() == 0:
self.state = runQueueComplete
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 636, in RunQueueData.prepare():
if 'mcdepends' in task_deps and taskname in
task_deps['mcdepends']:
> add_mc_dependencies(mc, tid)
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 614, in add_mc_dependencies(mc='zcu102',
tid='multiconfig:zcu102:/home/ceresoli/temp/test-mc-xilinx-2/poky/build/../meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb:do_compile'):
if mc == frommc:
> fn = taskData[mcdep].build_targets[pn][0]
newdep = '%s:%s' % (fn,deptask)
KeyError: 'pmu-firmware'
ERROR: Running idle function
Traceback (most recent call last):
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/cooker.py",
line 1415, in buildTargetsIdle(server=<ProcessServer(ProcessServer-1,
started)>, rq=<bb.runqueue.RunQueue object at 0x7fd352672240>, abort=False):
try:
> retval = rq.execute_runqueue()
except runqueue.TaskFailure as exc:
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 1479, in RunQueue.execute_runqueue():
try:
> return self._execute_runqueue()
except bb.runqueue.TaskFailure:
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 1399, in RunQueue._execute_runqueue():
[43,
967, 4, 3, 1, 5, 3, 7, 13, 1, 2, 1, 1, 246, 35, 1, 38, 1, 35, 2, 338,
204, 142, 3, 3, 37, 244])
> if self.rqdata.prepare() == 0:
self.state = runQueueComplete
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 636, in RunQueueData.prepare():
if 'mcdepends' in task_deps and taskname in
task_deps['mcdepends']:
> add_mc_dependencies(mc, tid)
File
"/home/ceresoli/temp/test-mc-xilinx-2/poky/bitbake/lib/bb/runqueue.py",
line 614, in add_mc_dependencies(mc='zcu102',
tid='multiconfig:zcu102:/home/ceresoli/temp/test-mc-xilinx-2/poky/build/../meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb:do_compile'):
if mc == frommc:
> fn = taskData[mcdep].build_targets[pn][0]
newdep = '%s:%s' % (fn,deptask)
KeyError: 'pmu-firmware'
-----------------------8<-----------------------
I have no idea what this means, but removing the do_compile[mcdepends]
line from u-boot-xlnx_2018.3.bb the build started properly and is
currently building.
--
Luca
test-multiconfig.sh
Description: application/shellscript
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
