Hi everyone, i'm still a novice and autodidact and i'm tring to set up the Zedboard's hdmi. I'm currently using the "thud (2.6.2)" version of poky.
This is what i've done so far: - I used the Vivado project from here: https://github.com/analogdevicesinc/hdl/tree/master/projects/adv7511/zed and with SDK i generated the device-tree. I created a layer and i inserted the ps7_init_gpl.c/h, the device-tree and the bitstream inside my project. - This is my bblayer.conf: BBLAYERS ?= " \ /home/jksandek/poky/meta \ /home/jksandek/poky/meta-poky \ /home/jksandek/poky/meta-yocto-bsp \ /home/jksandek/poky/meta-openembedded/meta-oe \ /home/jksandek/poky/meta-openembedded/meta-python \ /home/jksandek/poky/meta-openembedded/meta-networking \ /home/jksandek/poky/meta-openembedded/meta-multimedia \ /home/jksandek/poky/meta-xilinx/meta-xilinx-bsp \ /home/jksandek/poky/meta-xilinx-tools \ /home/jksandek/poky/meta-petalinux \ " and this is my local.conf: MACHINE ??= "zedboard-zynq7" IMAGE_INSTALL_append = " rsync busybox tmux nano i2c-tools devmem2 python3 python3-pip dropbear" LICENSE_FLAGS_WHITELIST += " commercial commercial_faad2 commercial_gstreamer1.0-plugins-ugly " ENABLE_I2C = "1" - At the end i did "bitbake core-image-sato" and compiled without errors, but when i start up, the Zedboard cannot find the screen connected to the hdmi. What should i do? This is the right mailing list to ask this? Thanks for your help.
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
