At work we use Windows NT V4.0, so what I'm going to do is print a copy of
the smatcam.ini along with the pmill.ini and awedm.ini files. I'll do some
comparing and hopefully come up with something...
-----Original Message-----
From: Bill Schoeppe [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 04, 2000 9:28 AM
To: Michael Senack; '[EMAIL PROTECTED]'
Subject: Re: [mfg-smartcam] Color/colours help
this may be too simple but check your smartcam.ini file who
knows?
thanks bill
-----Original Message-----
From: Michael Senack <[EMAIL PROTECTED]>
To: '[EMAIL PROTECTED]'
<[EMAIL PROTECTED]>
Date: Tuesday, July 04, 2000 5:20 AM
Subject: [mfg-smartcam] Color/colours help
>I recently reinstalled SmartCAM V11.5 due to some missing
.DLL files error.
>I think this error occurred because I deleted V3.0 of
Acrobat Reader. The
>reason for doing that was because, I have a V4.0 of Acrobat
Reader. See the
>logic... I'm figuring that this was the catalyst that
redenered SmartCAM
>inoperable. Unfortunately I had emptied the recycle bin so
I couldn't
>restore Acrobat Reader V3.0
>
>Well to make a long story short I figured it would be
quicker to reinstall
>V11.5 which it was at first until I opened up the
Production Mill and
>Advanced Wire EDM modules to find no color/colours!
>
>Below I dug out from Jun/2000 archives an e-mail about lack
of
color/colours
>problem like the one I'm experiencing. I tried both the
suggestions with no
>success. I even ran both configuration files from the
D:\Tec_supp\Config\
>sub-directory and sill no color\colours. I did a reboot
after the
reinstall.
>I removed everything and reinstalled SmartCAM again but no
color/colours.
>
>Any other ideas would be appreciated.
>
>
>
>
>Message-ID:
<83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV>
>From: "Lauzus, Frederick" <[EMAIL PROTECTED]
><mailto:[EMAIL PROTECTED]?subject=Re:%20[mfg-smartcam]%20RE:%20colors&replyt
o
>=83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV> >
>Subject: [mfg-smartcam] RE: colors
>Date: Mon, 26 Jun 2000 13:23:25 -0400
>
>
>Johnny,
>
>Check your Windows display properties for the number of
colors used.
>SmartCAM will run with 16 colors but it looks like hell,
especially in Show
>Cut. You should use at least 256 colors with 32,000 or more
preferred.
Check
>the previous message listed below for more information on a
Config utility
>shipped with SmartCAM v11 to help adjust your colors.
>
>
>
>=============================================
> Fred Lauzus, CAM Programming Coordinator
> High Steel Structures, Incorporated
> mailto:[EMAIL PROTECTED]
><mailto:[EMAIL PROTECTED]?subject=Re:%20[mfg-smartcam]%20RE:%20colors&replyt
o
>=83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV>
>http://www.highsteel.com <http://www.highsteel.com>
>=============================================
>
>
>-----Original Message-----
>From: Hubbard, Johnny [mailto:[EMAIL PROTECTED]
><mailto:[EMAIL PROTECTED]?subject=Re:%20[mfg-smartcam]%20RE:%20colors
&
>replyto=83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV>
]
>Sent: Monday, June 26, 2000 9:13 AM
>To: mfg-smartcam
>Subject:
>
>We installed SmartCAM on another PC a couple of months ago.
Since there is
>no tech support that I can find and the IS dept seems to
>not be able to give much help I figured yall are the best
place to find
>help. The problem is when we installed it there is no color
on any
>layers and there are lines between menu picks on the right
side and
>everything is black and gray. There is no color option to
choose
>from in the display colors for tools or layers. Any
ideas?
>
>
>Appreciate any suggestions.
>Thanks from Tenn.
>
>Johnny
>======================================================================
>To find out more about this mailing list including how to
unsubscribe,
>send the message "info mfg-smartcam" to
[EMAIL PROTECTED]
><mailto:[EMAIL PROTECTED]?subject=Re:%20[mfg-smartcam]%20RE:%20colors
&
>replyto=83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV>
>======================================================================
>
>
>-----Previous Message-----
>From: Lauzus, Frederick [mailto:[EMAIL PROTECTED]
><mailto:[EMAIL PROTECTED]?subject=Re:%20[mfg-smartcam]%20RE:%20colors&replyt
o
>=83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV> ]
>Sent: Friday, October 08, 1999 8:18 AM
>To: mfg-smartcam
>Subject: RE: [mfg-smartcam] Layer colors
>
>
>F.Y.I.
>
>There is configuration program that provides a visual
method of setting
>certain properties of the SMARTCAM.INI file. It is included
with SmartCAM
>v11
>and is located at D:\Tec_supp\Config\Config.zip on the
SmartCAM v11 CD.
>
>To install and use this utility, unzip the file CONFIG.ZIP
into a temporary
>directory and then run its SETUP.EXE program. The files
will be installed
>in
>the directory you choose and you will be able to run the
utility by using
>the
>file CONFIG.EXE. You can also create an icon or shortcut
to this file to
>make
>accessing the program easier.
>
>The utility will read system variables to find the location
of the files it
>needs. You will be able to set GUI colors, paths to files,
menu location,
>code
>file output options, fonts, hot keys, etc without manually
editing the
>SMARTCAM.INI file. Most changes made with this utility will
not be applied
>until the next time a SmartCAM application is opened.
>
>To get the most out of SmartCAM's 16 color palette, set the
number of
colors
>in your Windows display settings higher than 256. This will
allow you more
>flexibility in what colors you can define in SmartCAM. I
use the attached
>file COLORS.pm4 as a test pattern for evaluating changes to
the 16 layer
>and step colors.
>
>=============================================
> Fred Lauzus, CAM Programming Coordinator
> High Steel Structures, Incorporated
> mailto:[EMAIL PROTECTED]
><mailto:[EMAIL PROTECTED]?subject=Re:%20[mfg-smartcam]%20RE:%20colors&replyt
o
>=83DFFB537B78D1119AA9080009DE9DBF0227CBA3@MAILSERV>
>http://www.highsteel.com <http://www.highsteel.com>
>=============================================
>
>======================================================================
>To find out more about this mailing list including how to
unsubscribe,
>send the message "info mfg-smartcam" to
[EMAIL PROTECTED]
>======================================================================
>
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
