I'm not sure but something way back in my head is telling me that the older (dos) ver. of SmartCam had a limit on the number of files it could save and view. Did you try making another directory and try to save in the empty directory.
Dave Wolfgang ----- Original Message ----- From: "Mike Gailey" <[EMAIL PROTECTED]> To: "Todd Trammell" <[EMAIL PROTECTED]>; "SMARTCAM" <[EMAIL PROTECTED]> Sent: Monday, October 16, 2000 10:29 AM Subject: [mfg-smartcam] Re: SmartCam > Todd, > It would be really hard to say by viewing in email only. You may have already > tried it, but turn Sharing off and see what happens. If permissions are set on > the server and Smartcam is installed on a network machine, disconnect from the > server and try to save. I started with Version 7 and never saw your specific > version. > Have you asked this in the Smartcam User Group? Some real old timers are there > and may know the application first hand. I will cc this to the group and see if > someone can help. > Michael > > > > Todd Trammell wrote: > > > Re-installing was the first thing that I tried. Do you think there may be a > > problem with our network? I can save to a floppy disk with no problems. The > > company that we bought the software from still provides minor support. They > > do not think it is in the software but could be a problem with the .ini > > file. Thanks again for your help. Todd > > ----- Original Message ----- > > From: "Michael" <[EMAIL PROTECTED]> > > To: "Todd Trammell" <[EMAIL PROTECTED]> > > Sent: Saturday, October 14, 2000 12:09 PM > > Subject: Re: SmartCam > > > > > Todd, > > > I have seen this same error before in newer versions, it > > > seems like it was in version 8 or so. Back then we had > > > support, I called Building Blocks in Atlanta. The remedy > > > that fixed it for me was simple. I was told to rerun Setup > > > and it went away. I also had plenty of drive space and > > > something internal got fouled up and would no longer allow > > > me to save. Setup restored whatever the problem was and I > > > have never seen it since. Hope this helps, > > > Michael > > > > > > Todd Trammell wrote: > > > > > > > SmartCam Mike: I am emailing you because you obviously > > > > have had experience with Smartcam software. We are using > > > > SmartCam 4.2--I know its old but that is all we have. I > > > > am now getting and error 2930: Not enough disk space, > > > > however we have plenty of disk space and full control for > > > > permissions. We are running this software on Windows NT > > > > and have been for 6 months and it has been working fine. > > > > I can save to a floppy but not to the network or my local > > > > drives. Can you shed any light on my problem. Word and > > > > Excel save the files just fine, it seems to be only > > > > SmartCam. Please help!!! Thanks :) Todd > > > > > -- > Visit us at http://www.microsystemsgeorgia.com/toc.htm for > Smartcam and Rhino information. > > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
