Have you tried the "Grp Change Radius" in "Edit - Geo Edit - Blend"
using "Group Blend" function?
The following text is from the SmartCAM help file.
1. Select an active group of elements.
2. Select Edit--Geo Edit--Blend to open the Blend control panel.
3. Enter the Grp Change Radius value and either the Inside Radius
value, the Grp Outside Radius value, or both.
� The Grp Change Radius value identifies the blends to change.
� Enter a value of 0 for Inside Radius or Grp Outside Radius
to remove the blend from that corner.
� A nonzero value for Inside Radius or Grp Outside Radius
changes all blends matching the Change Radius value to the
new value.
4. Select the Group Blend action button to make the changes.
=============================================
Fred Lauzus, CAM Programming Coordinator
High Steel Structures, Incorporated
mailto:[EMAIL PROTECTED] http://www.highsteel.com
=============================================
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 22, 2000 12:53 PM
To: [EMAIL PROTECTED]
Subject: [mfg-smartcam] Multiple Radius edit
I have an imported file with 140+ arbitrary pockets each with .25 and .06
corner
radius. Is there a way to do a "mass" change of the radius? I guess what
i'm
shooting for is that i need to do wall offsets to create roughing profiles
and
when using wall offset pending upon offset amount the radius gets smaller
creating a tool dia/offset problem. Thanks, Rick (FF)
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
