Try this ... This was posted somewhere, sometime, by somebody, but I can't remember who it was so my apologies for the lack of attribution.
Here is a fully functional demo that works really great. It's well worth the the $100 (US). <http://hometown.aol.com/gcodemcode/index.htm> http://hometown.aol.com/gcodemcode/index.htm -- John Gent Structural Dynamics Research Corporation Americas Support Center - Eugene -----Original Message----- From: Jon Willumsen [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 11, 2000 9:33 AM To: Smartcam User Group Subject: [mfg-smartcam] I dont know if many others use fonts for machining into surfaced parts, ie engraving etc. My problem is that I often have to create text (TTF format) in other programs and export these to dxf and then import this into smatcam for machining. This is a little time consuming. Are there any fonts available for smatcam other then the four or so *.sh2 files supplied during instalation. This is not a major problem but rather anoying when in a hurry. Can TrueType Fonts be used directly in smartcam as this would cure all my problems. Regards Jon Willumsen ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
