Insert an User_Event stating #ZHOME=1.25 in the .pm4 shape file with the tool that you want Z1.25 to appear at. Then on the very next tool put another User_Event stating #ZHOME=1.0 in the .pm4 shape file with that tool. Then change your G43 Z1.0 H01 line in your template to G43 Z#ZHOME H01 as per the following sample template. @START #EVAL(#U8=0)<HURCO.TMP DEBUG HEADINGS U8 IS 1,SET TO 0 FOR NO DEBUG> #IF(#U8=1)<**** START > #EVAL(#U1=0) #EVAL(#C0=1) #EVAL(#C1=1) #EVAL(#C3=0) #EVAL(#U3=10) #EVAL(#ABSI=0) #OFFBLK % <#S0 )> <( #S1 )> <( #S2 )> <( #S3 )> <( #S4 )> ( #FILE - #DATE - #SYSTIME ) #C3N#U3M98P1 G43 Z#ZHOME H01 <--------------------------------------------------- here #EVAL(#U3=#U3+10) #C3T#FMT(#TOOL,F2.0)( #TLCMT ) <M0( #S9 )> <M0( #S1 )> <M0( #S2 )> <M0( #S3 )> #C3#TLIDG43X#XPOSY#YPOSZ#ZPOSS#SPEEDH#FMT(#LOFF,F2.0)#SPNDL #CALL(G99) #EVAL(#DOFF=#TOOL+30) @TOOLCHG #IF(#U8=1)<**** TOOLCHG > #IF(#C1=1)<>#ELSE<#C3#C1( #S9 )#RESET(#FEED)> #EVAL(#C1=1) #C3N#U3M98P1 #EVAL(#U3=#U3+10) #C3T#FMT(#TOOL,F2.0)( #TLCMT ) G43 Z#ZHOME H01 <------------------------------------------------ and here <M0( #S9 )> <M0( #S1 )> <M0( #S2 )> <M0( #S3 )> #C3#TLIDG43X#XPOSY#YPOSZ#ZHOMES#SPEEDH#FMT(#LOFF,F2.0)#SPNDL #RESET(#FXD,#MOV,#PECK,#DWELL,#C0,#FEED,#RTNLVL) #CALL(G99) #EVAL(#DOFF=#TOOL+30) @END #IF(#U8=1)<**** END > #C3M98P1 #IF(#C1=0)<#C3#C1( #S9 )> #C3M30 #OFFBLK % The only other thing you'll have to add to your .pm4 shape file is a point with the first tool after EL 0 with a Z_level and Clear_Z of 1.0 so all the tools will code G43 Z1.0 H01 until you tell it otherwise with an User_Event in the .pm4 shape file. This should resolve your problem. Bye
-----Original Message----- From: Colin Williams [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 14, 2000 9:55 AM To: Smartcam Forum Subject: [mfg-smartcam] G43 LINE In my "G43 Z1.0 H01" line I usually have a "Z" value of 1.0. How do I change this value just for one tool (Z1.25) then go back to "Z1.0" for the next tool. Thank You Colin Williams ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
