Re: [mfg-smartcam] pcx files

[Jon Baker]

I would think that Corel Draw could do that.  I know I bought a copy off ebay or egghead, coreldraw8.0, for under $100, and that was over a year ago.  I would think you could get that for probably around $50.00 total.  If not that, perhaps a similar drawing package could do it.  Take a run out to Office Depot or something, and I bet they have one of those cheap, key programs to do it, KeyCad, KeyDesign, etc. Good luck Jon   ----- Original Message ----- From: Stannard, Rick To: [EMAIL PROTECTED] Sent: Tuesday, January 16, 2001 7:40 AM Subject: [mfg-smartcam] pcx files Hello all,   I have a problem here and it has nothing to do with smart cam.  I have this other programming package that is specifically for our gildemeister Sprint and Twin 65 machines.  They have discontinued upgrading the software after only a couple of years, and  I want to add different tooling to it. The problem is that the drawings of the tooling are all in pcx format, which is ok, I can convert what I need to, but I need to find a program that will let me draw to scale the tooling, then I can convert to pcx. The drawings are in color, so I need to do that, too.   Does anybody know of any program that may help me out.                 Thanks... Thank you, Rick Stannard SR. CNC Programmer Fairchild Fasteners, South Bay 3000 W. Lomita Blvd Torrance, CA. 90505 Ph. (310)784-4394 [EMAIL PROTECTED] www.fairchildfasteners.com