It appears his milling auto-id format file, "Mautoid.fmt", became corrupt. Since this file can be customized it may not be automatically overwritten when updating or reinstalling the software.
Try copying the attached unedited file in the exact path specified in the error message. 12028: Diagnostic from PREPROC(): Failed to initialize. 12041: Fatal error in file g:\sm11\MILL\JOSDEF\MAUTOID.FMT <<mautoid.fmt>> ============================================= Fred Lauzus, CAM Programming Coordinator High Steel Structures, Incorporated mailto:[EMAIL PROTECTED] http://www.highsteel.com ============================================= > -----Original Message----- > From: John Estes [mailto:[EMAIL PROTECTED]] > Sent: Thursday, March 01, 2001 11:34 AM > To: SmartCam Tech > Subject: [mfg-smartcam] step list format file has a fatal error > > << Message: Untitled Attachment >> << File: John Estes.vcf >> << File: > error.jpg >> > -----Original Message----- From: Sent: None Subject: We have a customer that has the following "fatal error" ( see attached .jpg) when starting his SmartCAM A3D. He was running fine on NT, then one day this show's up. He said nothing else was installed on that computer. We had him reinstall over the same location and the same thing, then we tried another drive and another directory name (sm11 not sm9), same results. He did install on another computer and it runs. Any help would appreciated 10010:the step list format file has a fatal error in it cannot continue . . Thank You John John Estes [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> www.solidinc.com <http://www.solidinc.com> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Solid Solutions, Inc. 15182 Bolsa Chica Road, Suite B Huntington Beach, CA., 92649 SDRC Ideas CAMAX Camand SmartCAM Imageware Silicon Graphics Sirius NCV (714) 892-1012 x11 - Phone (714) 893-6373 - FAX (714) 810-5412 - Numeric Pager (888) 428-0262 - Message Page (714) 329-5467 - Cel Phone
mautoid.fmt
Description: Binary data
