Question # 103 is set to 0 If I change the radius in my process model to be bigger than .010 " the output is with G03. Otherwise is converting G03 into small G01 movements.
Peter -----Original Message----- From: Dave Coupar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 29, 2002 9:15 AM To: Petre Kounov; Smart Cam User Group (E-mail) Subject: Re: [mfg-smartcam] Circular interpolation Peter, Check SMF question # 103. Minimum total arc angle: If it's not set to 0, try that. Dave ----- Original Message ----- From: "Petre Kounov" <[EMAIL PROTECTED]> To: "Smart Cam User Group (E-mail)" <[EMAIL PROTECTED]> Sent: Tuesday, January 29, 2002 9:27 AM Subject: [mfg-smartcam] Circular interpolation > > Hi All, > > I am using SC Advanced Turning 11.1 . > In one of mine finish bore operations I have a .008" rad and the bor/bar has > a .005" rad. > > In the code instead of G03 X_ Y_ R.003 F_ I have G01 X_ Y_ F_ > > What I have now : > > G99 G01 X0.1969 > Z-0.8008 F0.0015 > X0.1966 Z-0.8019 > X0.1269 Z-0.9814 > > The distance between the start and end point in the code is .0003" on X and > .0011 on Z , but I think there > should be still G03 instead of G01 : > G99 G01 X0.1969 > Z-0.8008 F0.0015 > G03 X0.1966 Z-0.8019 R.003 > G01 X0.1269 Z-0.9814 > > > Does anybody knows how to force circular output? > > Thanks in advance, > Peter > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ====================================================================== ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
