#21, #91 are set to .0001 , but same result Peter -----Original Message----- From: Gregg Olson [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 29, 2002 12:12 PM To: Petre Kounov; 'Dave Coupar'; Smart Cam User Group (E-mail) Subject: RE: [mfg-smartcam] Circular interpolation
Pete, Check #21 (Smallest Pos Increment), should be .0001 --gregg >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED]]On Behalf Of Petre Kounov >Sent: Tuesday, January 29, 2002 8:31 AM >To: 'Dave Coupar'; Petre Kounov; Smart Cam User Group (E-mail) >Subject: RE: [mfg-smartcam] Circular interpolation > > > >Question # 103 is set to 0 > >If I change the radius in my process model to be bigger than .010 " the >output >is with G03. Otherwise is converting G03 into small G01 movements. > >Peter > >-----Original Message----- >From: Dave Coupar [mailto:[EMAIL PROTECTED]] >Sent: Tuesday, January 29, 2002 9:15 AM >To: Petre Kounov; Smart Cam User Group (E-mail) >Subject: Re: [mfg-smartcam] Circular interpolation > > >Peter, > >Check SMF question # 103. Minimum total arc angle: > >If it's not set to 0, try that. > >Dave >----- Original Message ----- >From: "Petre Kounov" <[EMAIL PROTECTED]> >To: "Smart Cam User Group (E-mail)" <[EMAIL PROTECTED]> >Sent: Tuesday, January 29, 2002 9:27 AM >Subject: [mfg-smartcam] Circular interpolation > > >> >> Hi All, >> >> I am using SC Advanced Turning 11.1 . >> In one of mine finish bore operations I have a .008" rad and the bor/bar >has >> a .005" rad. >> >> In the code instead of G03 X_ Y_ R.003 F_ I have G01 X_ Y_ F_ >> >> What I have now : >> >> G99 G01 X0.1969 >> Z-0.8008 F0.0015 >> X0.1966 Z-0.8019 >> X0.1269 Z-0.9814 >> >> The distance between the start and end point in the code is .0003" on X >and >> .0011 on Z , but I think there >> should be still G03 instead of G01 : >> G99 G01 X0.1969 >> Z-0.8008 F0.0015 >> G03 X0.1966 Z-0.8019 R.003 >> G01 X0.1269 Z-0.9814 >> >> >> Does anybody knows how to force circular output? >> >> Thanks in advance, >> Peter >> ====================================================================== >> To find out more about this mailing list including how to unsubscribe, >> send the message "info mfg-smartcam" to [EMAIL PROTECTED] >> ====================================================================== >> >> > > >====================================================================== >To find out more about this mailing list including how to unsubscribe, >send the message "info mfg-smartcam" to [EMAIL PROTECTED] >====================================================================== >====================================================================== >To find out more about this mailing list including how to unsubscribe, >send the message "info mfg-smartcam" to [EMAIL PROTECTED] >====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
