one of the questions in the smf file deals with coding poly line tolerance
filtering, I forget which one but this will probably be set too high!
thanks bill
----- Original Message -----
From: Ernie Gemmel <[EMAIL PROTECTED]>
To: Mfg-Smartcam (E-mail) <[EMAIL PROTECTED]>
Sent: Tuesday, March 05, 2002 6:07 AM
Subject: [mfg-smartcam] ellipse machining
> Hi Folks,
> I am trying to deburr the intersection of two holes that are on an angle
to
> each other, thus creating an ellipse.
>
> The problem is when I try to machine the ellipse, I get ~.025 long line
> segments and this produces an unacceptable facetted appearance on the
> break-edge.
>
> I have tried messing with polyline explosion tolerances etc etc etc and i
am
> getting nowhere fast!
> Does anybody have any ideas suggests or methods that could help?
> thanks in advance
> ernie
>
>
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
