Hey All
i hope everyone is well. i am still developing my post for our little maho. I've got most things working fine and have been working with it. what I can't figure out for some reason is how to get my G79 to output the correct posistion. what the G79 does for our machine is actavate a canned cycle. so you would type something like this...
N20 G81 X0 Y0.05 Z-0.1 F4.8 M3
N25 G79 X-0.875 Z-3.8 Y0.0
N30 G79 Z-5.8
N35 G79 X-9.875
N40 G79 Z-3.8
so everytime it sees the G79 in this case it actavates the drill to do the cycle at the posistion the post for that looks like this..
@FXD2
< #ABSI>< #FXD X#DWELL Y#ZCHK Z#ZDPTH>< F#FEED>< S#SPEED>< #SPNDL>
#EVAL(#V1=0)
G79< X#XPOS>< Z#YPOS>< Y#V1>
this is fine on most ocations, but not fine when drilling in pockets, I have tryed to change things, with no resolve, any input would be greatly valued, thank you!
kevin Brown
Brock University
Canada
