Oops... I forgot to include the .pcb file in the previous email for the dialog box called by the macro.
This is my second attempt to send this, so please excuse any duplicate emails. ============================================= Fred Lauzus, CAM Programming Coordinator High Steel Structures, Incorporated mailto:[EMAIL PROTECTED] http://www.highsteel.com ============================================= -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 18, 2002 12:36 PM To: [EMAIL PROTECTED] Subject: RE: [mfg-smartcam] How can I batch translate .sh3 and .pm4 files to iges? Yes and no. Yes, you do need to convert sh3 files to pm4 before running a batch process on the Cam Connection. No, you don't need to manually convert them. Attached is a macro, CONVERT.MCL, that I wrote years ago when I updated my company from v4.5 to v11.5. It converts sh2 and sh3 shape files to pm4. With a little modification you could have this macro export the file as iges after saving as a pm4. ============================================= Fred Lauzus, CAM Programming Coordinator High Steel Structures, Incorporated mailto:[EMAIL PROTECTED] http://www.highsteel.com ============================================= -----Original Message----- From: Michael [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 18, 2002 12:13 PM To: [EMAIL PROTECTED]; 'smartcam user group' Subject: Re: [mfg-smartcam] How can I batch translate .sh3 and .pm4 files to iges? Fred & Group, I got the PM4 to IGES to batch translate fine. However I don't see anything for the SH3 files, is there something I missed or will I need to manually convert them to PM4 and then batch translate them? Thanks, Michael [EMAIL PROTECTED] wrote: > > There is a batch translation macro with a accompanying CTK panel shipped > with v11 called "batchcc". It can be found on the SmartCAM V11 CD under > \TEC_SUPP\UTILITY\BATCHCC. > > ============================================= > Fred Lauzus, CAM Programming Coordinator > High Steel Structures, Incorporated > mailto:[EMAIL PROTECTED] http://www.highsteel.com > ============================================= > > > -----Original Message----- > From: Michael [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, June 12, 2002 2:48 PM > To: 'smartcam user group' > Subject: [mfg-smartcam] How can I batch translate .sh3 and .pm4 files to > iges? > > Group, > Does anyone have a macro that will allow batch translation of .sh3 > and .pm4 files into iges format? I only need to extract the models > from an old hard drive full of files. No toolpath or tool info, just > the models. > TIA, > Michael > -- > > Michael Gailey > Artistic CNC Mill, Router and Engraver Programming > 3D modeling for Product Design and Development > http://www.microsystemsgeorgia.com/toc.htm > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== -- Michael Gailey Artistic CNC Mill, Router and Engraver Programming 3D modeling for Product Design and Development http://www.microsystemsgeorgia.com/toc.htm
convert.pcb
Description: Binary data
